Original Line Cylinders - PW Romex

1-1/16" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 0.9 of Air Line Pressure• Enclosed Spring Force: 3lbs. Relaxed –6lbs.Compressed• Rod Wipers Available on D, DP, DXand DXDEModelsNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)** Front port rotated 90° on BF-090-D.• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .25" to nose mount overall length• PIVOT BUSHING (Y).250" IDSINGLE AND REVERSE ACTING BUMPER (B)• $3.00 additional• Add .125 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.20 additional• Add .125 to overall length• Models DXDE and DXDEH add .500EXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inch ofextension• DXDE, add $1.10 per inch of extension; extension added toeach end• DXDE hollow rod, add $1.65 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $8.00 to base price + $1.05 to stroke adder• See page 1.65 for overall length addersHEAVY SPRINGS (H) are standard on all single acting blockfront and block rear mount and –NRLSC models, and reverseacting except –RA type.For all other single acting, add $1.90• Spring Force: 6lbs. relaxed –12lbs. compressedOPTIONS continued…MAGNET (prefix M) –Add $12.00• Single acting and DXDE add .125" to overall length• Use bumper length adder for DXDE and DXDEH when magnetand bumper are ordered together.• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.95• Reverse acting add $1.25• Double acting add $1.85• DXDE add $2.45HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $5.45• Double acting add $12.95• DXDE add $16.40• Reverse acting add $8.45ROD WIPER (W)(not available in standard single acting)(now available in block mount)• Double acting, add $2.90• DXDE add $5.80MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.90• Double acting add $9.55• DXDE add $13.45STAINLESS STEEL ROD (prefix SR)• Add $2.10• Standard on DX, DXDE, DXDEH, All block mountingsand MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $14.00□ Enter Stroke Length as 3rd DigitMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□$14.45BASE PRICEAdd $2.80 per inch of stroke09□ -NR$17.00BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .23Adder Per Inch of Stroke: .11Single Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .25Adder Per Inch of Stroke: .12See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.32