AT-15 HD 16 Owners Manual - American Tactical Imports

PREVENTATIVE MAINTENANCE CHECKS & SERVICES…CHECK BEFORE YOU FIRE!...1.) Check to see that there is NO EXCESSIVE OILin the Bore. If there is, swab it out with apatch and the cleaning rod. ALWAYS CLEANA NEW RIFLE BEFORE FIRING.WARNING! If the rifle is fired with oil - orwater - in the barrel, excessive pressure willbe created causing the rifle to explode.2.) Retract the Bolt to ensure free movementbetween Bolt Carrier and Gas Tube.3.) Perform Safety Function Check (below) to ensure that Safety Selector Lever works properly.SAFETY FUNCTION CHECK…UNLOAD RIFLE - REMOVE MAGAZINE - CHECK CHAMBER1.) Remove Magazine if installed. Pull Charging Handle assemblyto rear. Check that Chamber is clear. Let the Bolt and BoltCarrier close. Do not pull Trigger. Leave Hammer in cockedposition.WARNING! If Rifle fails any of the following tests, continued useof the Rifle could result in injury to, or death of, people aroundyou.2.) Place Selector Lever in SAFE position, point rifle ina safedirection, and pull Trigger. THE HAMMER SHOULD NOT FALL.Continued on next page...PAGE 5Manufactured by Head Down Products