production and business methods in the integral knitting supply chain

AUTEX Research Journal, Vol. 8, No4, December 2007 © AUTEX3. Definitions3.1. Production of flat knitted garmentsThe flat knitting machine is one type of knitting machinery. It has a linear needle bed that makes itpossible to produce flat knitted rectangular panels for products like sweaters, cardigans, skirts,scarves and other outer garment products. This machine type traditionally produces coarse structureknit panels, with a fixed edge and a welt at the bottom of the panel and then structures or patterns asjacquard, stripes or cables across the panel. Thus the production of a product from yarn to garmentwith flat knitting technology could be done in several ways, depending on the machinery available andthe production methods that a company has adopted.Knitting made Finishing Cutting Sewing FinishingReadymadegarmentFigure 2. Production process of flat knitted garments.The production from yarn to ready made garment consists of several processes, as shown in Figure 2.It starts with the knitting process, where yarn on yarn-cones is knitted to panels in the flat knittingmachine. The panels are steamed in the finishing process after knitting. In the cutting process thepanels are cut to the right shape and size according to design quality requirements. The panels arejoined together to a garment in the sewing process. To accomplish the right quality, the garment isoften passed through a finishing process such as washing or steaming. The traditional production ofcoarse flat knitted garment thus consists of several-time consuming processes after knitting.Knitting Cut & sew FinishingReady made garmentFigure 3. Production process of complete garment concept.The production of complete garment due to the new complete garment technology is done as shownin Figure 3. Yarn on yarn-cones is knitted to complete garments directly in the flat knitting machine.After knitting, some cutting and sewing processes can be obtained, but not to the extent as in ordinaryflat knit production, shown in Figure 2, as the garment is here complete and almost ready made. Herethe finishing of the garment is done in only one process, after knitting, cutting and sewing. The factthat the garment is knitted complete and almost ready made, directly in the knitting machine, with lessnumber of manufacturing processes, makes it possible to reduce the start to finish time of production.The chain of processes becomes shorter and especially non-value added time, such as waiting timefor the garments between processes, is reduced.3.2. Production methods in flat knitting garment productionThe manufacturing process of flat knitted garments can be divided in four different productionmethods:• Cut & sew• Fully fashion• Integral knitting• Complete garment3.2.1 Cut & SewCut & sew is the conventional and most common method for production of flat knitted garments.Panels for front, back and sleeves are knitted in a rectangular form and then cut in the right form in thecutting process. After the cutting process, the panels are sewn together with separately knittedtrimmings and pockets to complete the garment. Both cutting and sewing are post-knit processes,separated from the knitting machine. With cut & sew, up to 30% of the original fabric may go to wasteas cut-loss. The advantage with this type of production is that it could be done on all flat knittingmachines, including old models without computer processing systems. The disadvantages is thehttp://www.autexrj.org/No4-2007/0219.pdf 266