OptiMelt Automated Melting Point System - Stanford Research ...

44 System Screen Chapter 2ImportantTouch the LCD screen to reenergize the backlight and illumination LEDs.DelayEnter the backlight Delay time.If the backlight Saver is enabled and the time of day is between the Off time and On time,then the display backlight turns off if the touchscreen remains inactive for the backlightDelay time.Off timeOn timeEnter the backlight On time/Off time.If the backlight Saver is enabled and the time of day is between the Off time and On time,then the display backlight turns off if the touchscreen is inactive for the backlight Delaytime.RecommendationSet the Off time to the time at which you leave the lab at night. Set the On time to justbefore your return in the morning. There is no need to keep the light on when nobody islooking at the screen.Calibrate MenuSystem > CalibrateTouch the Calibrate button to access the Temperature Offset Calibration Submenu. Thissubmenu includes the Camera Optical Alignment Submenu.For security, a Calibration Password is required to access this menu.Consult Chapter 4 of this manual for detailed information on TemperatureOffset Calibration and Camera Optical Alignment for your OptiMelt.OptiMelt Automated Melting Point System