OptiMelt Automated Melting Point System - Stanford Research ...

28 Melt Screen Chapter 2The Graph button is only available on the Melt Screen while a heating ramp is underway.Touch Graph in the Melt Screen during heating to display a real-time Melt Graph for theongoing melting point determination.Melt Graphs are stored in memory as part of the Melt Point Reports. Touch Graph in theReport screen to display the stored Melt Graphs corresponding to the selected Report.CursorTouch within the graph area to move the cursor. Touch the right half of the chart to movethe cursor to the right, the left half to move to the left. Touch close to the center to moveslowly, at the edges to move rapidly. The temperature and relative intensity (%) at thecursor are displayed in the boxed area above the graph.Press Done to exit the Melt Graph display and return to the Melt or Report Screen.TipUse real-time Melt Graph displays to track the progress and detect the Halt temperatureof all your melts.Setup MenuTouch Setup in the Melt Screen to display the Setup Menu.Melt > SetupFigure 19. Melt Setup SubMenu.Use the Setup menu to program the Digital Image Processor detection thresholds(Onset%, Single% and Clear%), enter a Chemical name and Batch number (for Reports)and Save/Restore/Delete analysis methods.Warning!Changes performed within the Setup menu will affect subsequent melting point results.DetectionOptions: Visual only, Camera.Choose between Automated and Visual-only melting point detection.OptiMelt Automated Melting Point System