OptiMelt Automated Melting Point System - Stanford Research ...
OptiMelt Automated Melting Point System - Stanford Research ... OptiMelt Automated Melting Point System - Stanford Research ...
xBack Panel OverviewPrinterOptiMelt includes a back panel RS-232 connector for an optional serial printer. The DB9connector is compatible with standard RS-232 cables.Compatible printers include Epson, Citizen and generic (text only) dot matrix serialprinters.Power Entry ModuleThe Power Entry Module is used to connect the OptiMelt to a power source through thepower cord provided with the instrument. The center pin is connected to the OptiMeltchassis so that the entire box is grounded. Connect OptiMelt to a properly groundedOutlet. Consult an electrician if necessary.OptiMelt is turned on by flipping the power switch on the Power Entry Module.The source voltage requirements are: 90-264 VAC, 47-63 Hz, 125W.USBOptiMelt comes standard with a USB communications port.The optional MeltView software package can handle real-time image transfer, allowingOptiMelt users to display and store high resolution digital images of the samples(including relevant information such as temperature, time and date) on your computerscreen during analysis. A CD containing the MeltView software is provided with theMPA100. The most current version of the MeltView software is also available free onthe Stanford Research Systems web site at www.thinkSRS.com.OptiMelt Automated Melting Point System
Specifications xiSpecificationsOperationTemperature display Melting point and melting point rangeStart temperature (Room temperature + 10 °C) to 396 °C (-20 °C minimum)Stop temperature (Start temperature + 4 °C) to 400 °CTemperature resolution 0.1 °CRamp rate0.1 °C to 20 °C per minuteHeat-up time~10 minutes (50 °C to 350 °C)Cool-down time~10 minutes (350 °C to 50 °C)Temperature accuracy ±0.3 °C (up to 100 °C)±0.5 °C (up to 250 °C)±0.8 °C (up to 400 °C)Reproducibility 0.2 °CTemperature sensor Pt RTD (built-in)Oven controlClosed loop PIDExternal SensorUser supplied, 100 Ω Pt RTD, α = 0.00385 Ω/Ω/°CGeneralDisplayPrinter interfaceComputer interfaceCapillariesDimensionsCapacityFill heightPowerOperating temperatureWeightDimensionsWarrantyBack-lit, 5.8" (diag.) touchscreen LCDRS-232 serial port. Supports Epson and Citizen compatible dotmatrix printers.USB. All instrument measurements may be performed usingthe optional MeltView software.1.4 mm to 2.0 mm outside dia., 100 mm lengthUp to 3 tubes simultaneously2 mm to 3 mm90 to 264 VAC, 47 to 63 Hz, 125 W0 °C to 40 °C, non-condensing9 lbs.7.5" x 8.5" x 10" (WxHxL)One year parts and labor on defects in materials andworkmanshipOptiMelt Automated Melting Point System
- Page 4 and 5: iiSafety and Preparation For Use•
- Page 6 and 7: ivSafety and Preparation For UseOpt
- Page 8 and 9: viContentsMelting Point Range 57Mel
- Page 10 and 11: viiiFront Panel OverviewReady LEDA
- Page 14 and 15: xiiSpecificationsOptiMelt Automated
- Page 16 and 17: 2 Getting Started Chapter 1• Repl
- Page 18 and 19: 4 Getting Started Chapter 1Ceramic
- Page 20 and 21: 6 Getting Started Chapter 1Principl
- Page 22 and 23: 8 Getting Started Chapter 1Quick St
- Page 24 and 25: 10 Getting Started Chapter 18. Preh
- Page 26 and 27: 12 Getting Started Chapter 1Touch t
- Page 28 and 29: 14 Getting Started Chapter 1If none
- Page 30 and 31: 16 Getting Started Chapter 1• Tou
- Page 32 and 33: 18 Getting Started Chapter 1OptiMel
- Page 34 and 35: 20 Displays and Menus Chapter 2Nume
- Page 36: 22 Melt Screen Chapter 2Melt Screen
- Page 39 and 40: Chapter 2 Melt Screen 25Touch the T
- Page 41 and 42: Chapter 2 Melt Screen 27Select Newe
- Page 43 and 44: Chapter 2 Melt Screen 29Select Came
- Page 45 and 46: Chapter 2 Melt Screen 31Options Men
- Page 47 and 48: Chapter 2 Melt Screen 33The thermod
- Page 49 and 50: Chapter 2 Timer Screen 35ResetTouch
- Page 51 and 52: Chapter 2 T Meter Screen 37Alarm Lo
- Page 53 and 54: Chapter 2 System Screen 39System Sc
- Page 55 and 56: Chapter 2 System Screen 41The Print
- Page 57 and 58: Chapter 2 System Screen 43Screen Me
- Page 59 and 60: Melting Point Determination 45Chapt
- Page 61 and 62: Chapter 3 Melting Point Determinati
Specifications xiSpecificationsOperationTemperature display <strong>Melting</strong> point and melting point rangeStart temperature (Room temperature + 10 °C) to 396 °C (-20 °C minimum)Stop temperature (Start temperature + 4 °C) to 400 °CTemperature resolution 0.1 °CRamp rate0.1 °C to 20 °C per minuteHeat-up time~10 minutes (50 °C to 350 °C)Cool-down time~10 minutes (350 °C to 50 °C)Temperature accuracy ±0.3 °C (up to 100 °C)±0.5 °C (up to 250 °C)±0.8 °C (up to 400 °C)Reproducibility 0.2 °CTemperature sensor Pt RTD (built-in)Oven controlClosed loop PIDExternal SensorUser supplied, 100 Ω Pt RTD, α = 0.00385 Ω/Ω/°CGeneralDisplayPrinter interfaceComputer interfaceCapillariesDimensionsCapacityFill heightPowerOperating temperatureWeightDimensionsWarrantyBack-lit, 5.8" (diag.) touchscreen LCDRS-232 serial port. Supports Epson and Citizen compatible dotmatrix printers.USB. All instrument measurements may be performed usingthe optional MeltView software.1.4 mm to 2.0 mm outside dia., 100 mm lengthUp to 3 tubes simultaneously2 mm to 3 mm90 to 264 VAC, 47 to 63 Hz, 125 W0 °C to 40 °C, non-condensing9 lbs.7.5" x 8.5" x 10" (WxHxL)One year parts and labor on defects in materials andworkmanship<strong>OptiMelt</strong> <strong>Automated</strong> <strong>Melting</strong> <strong>Point</strong> <strong>System</strong>