Series 9820Q ASTRA Installation/Operation Manual - Gasboy

GASBOY Series 9820Q023867 Wiring Diagram, Models: 9822Q-2, 9823Q-2International 230VACNOTES:1. All wiring and conduit runs must conform with all building/fire codes, all Federal, State, andLocal codes, National Electrical Code, (NFPA 70), NFPA 30, and Automotive and MarineService Station Code (NFPA 30A) codes and regulations. Canadian users must also complywith the Canadian Electrical Code.2. If the PUMP MOTOR line is controlled by a fuel management system using solid staterelays, a resistor assembly must be installed between the Pump Motor Feed line and Neutral toprevent false triggering of the authorization input. The resistor assembly is 30K OHM, 10Watt (P/N C06683) for 230 VAC international wiring.3. SLOW FLOW and FAST FLOW lines are typically used when connecting to an optionalvalve. Each of these lines is capable of supplying 300 mA AC maximum (170 mA ACmaximum if already connected to the optional valve). These lines must not be shorted toany conduit or chassis metal, mis-wired, or connected to any equipment requiring morethan stated maximum allowable current. If these restrictions are not followed, damageto the CPU PCB will occur.4. Use the wire size chart listed when determining the wire size for the control wiring.24 MDE-4339 9820Q ASTRA Installation/Operation • July 2004