Turnstone Furniture Specification Guide

Turnstone Metal DeskDesk and Desk Shell FactsDesks are available as shells(without storage) and in singleanddouble-pedestal models.Desks are shipped knockeddown (ready to assemble).Specifying, pages 387–389User’s edge profile is PVCwith a 3 mm radius. Backand side edge is 1 mm.Worksurface has a wood corewith Turnstone PerformanceLaminate (TPL). Universal laminateworksurfaces andUniversal wood worksurfaceswithout scallops are availableas options.Single-pedestal desksare non-handed.Leveling glidesadjust to allowinstallation onuneven floors.Lock, standard on deskswith pedestals, controls all ofthe drawers. Products withlocks ship with a lock facering and removable plasticplug to accommodate a lockcylinder installed on site. Lockcylinders must be specifiedseparately.cLock and Keying Options,page 460Handle pullsModesty panels are available partialorfull-height on desks and desk shells.Partial-height modesty panels are 12"H.Full-height modesty panels extend to thefloor. Desks and desks shells can alsobe specified without a modesty panel.Worksurface overhang:1 ⁄2" on front and sides1 1 ⁄2" on back sideUniversal laminate and woodworksurface overhang:1 ⁄2" on front and sides1" on back side1 /2" 1 /2"Pedestals are standard with two filedrawers. Box, box, file drawers are availableas an option. 22"D Turnstone underworksurfacepedestals are located beneath24"D worksurfaces. 28"D Turnstone underworksurfacepedestals are located beneath30"D worksurfaces.1" or1 1 /2"384 Turnstone Specification Guide