Turnstone Furniture Specification Guide

ReplyWorksurface FactsReply worksurfaces areavailable in a variety of shapes.Worksurfaces have a woodcore with a laminate surface.Specifying, pages 352-35650%50%50% 50%RectangularBridge Peninsula Angled peninsulaCorner50%50%Extended cornerEdge profile is 3 mm radiusPVC. PVC edge color is adefault determined by the colorspecified for the worksurface.Same edge detail is available onfreestanding lateral file, mobilepedestal, table tops, and ovaltop for carts.18" x 18" kneewell must beused to support rear corner ofcorner worksurface.Freestanding lateral filecan be used adjacent to a 24"Dworksurface to provide additionalworksurface. Height oflateral file and worksurface isthe same.Flat steel brackets areincluded with all worksurfacesto link adjacent worksurfaces.36"D worksurfaces aresupported by 30"D kneewellcorners.6"Peninsula worksurfaces canbe used to create an L-shapedconfiguration. Double post legsmust be used and are specifiedseparately.Angled peninsula kneewellcorner is available for supportbeneath angled peninsulaworksurfaces. Double post legsmust be used and are specifiedseparately.Angled peninsula worksurfacesare designed to be usedat right angles to a rectangularworksurface. Order peninsulaworksurface with left- or righthandgrommets to be used withworkwell corners.40%40%40%342 Turnstone Specification Guide