Turnstone Furniture Specification Guide

Kick SystemBin and Shelf FactsBin and shelves are steeland ship ready to assemble.They do not require screwsor fasteners. Once assembled,they can be movedwithout being taken apart.135%Specifying, page 115Lift-up doors open and closequietly with resilient plasticbumpers. When up, the doorsrest on top of the case to providemore storage spaceinside.Steel support hooks onend supports insert into theslotted channel of a panelor wall channel and lockinto place with a safetycatch.Metal overhead storage binLock(s) is standard on bins tosecure the door(s). Lock ishidden underneath the door.Lock is standard keyed random.Consecutive and specifickeying options areavailable. Master-keyed locksare also available. Productswith locks ship with a lockface ring and removable plasticplug to accommodate alock cylinder installed on site.Lock cylinders must be specifiedseparately.cLock and Keying Options,page 460Additional support forstability may be requiredwhen shelves and overheadstorage bins are attached topanels. Counterbalancingloads on opposite sidesof the panels increasesstability.cSee Stability Rules,page 38Clearance between worksurface andbottom of overhead storage bin is20 5 ⁄8" when storage unit is installed inthe highest position on a 66"H panel.Width of overhead storage unitmust match the width of the panel orpanels that it is attached to.Shelf lights are available fromSteelcase to recess into the bottomof Kick shelves and overheadstorage bins.cPages 120–12520 5 /8"Clearance34 Turnstone Specification Guide