Turnstone Furniture Specification Guide

Kick SystemBin and Shelf Storage Accessory FactsHorizontal brace is availableto reinforce vertical wall channelsthat support storage binsand shelves that are attachedto walls. Width of brace mustmatch width of shelf or storagebin. Components that are 48"Wor less do not require a horizontalbrace.Specifying, page 118Wall channels are available toattach shelves and bins to walls.Components attach at 1"increments, but screwsblock some slot locations.Wall channel can be positionedon wall at the heightneeded.Field install on the following:• Concrete walls: Hilti ® typeanchors.• Drywall or plywood: 5 ⁄8" thick,Toggler ® type 3 ⁄16" wallanchors.• Steel and wood studs: #10sheet metal or wood screws ofappropriate length.Attaching worksurfaces to wall channelsis not possible.Horizontal brace is required for eachcomponent that is wider than 48". Thebrace should be positioned at the top locationof each bin or shelf on the vertical wallchannel. Horizontal brace is also availablein 48"W to be used in applications wherethe strength of the wall is questionable.Anchors must be used in eachscrew hole location of the wallchannel.Limit to two bins or shelves for eachpair of wall channels.32 Turnstone Specification Guide