Turnstone Furniture Specification Guide

Kick SystemAdjustable-Height Worksurface FactsAdjustable-HeightWorksurface FactsCrank-adjustable,adjustable-height worksurfacessupport computers,keyboards, and mouse forusers in task-intensive orhigh-churn environments.Worksurfaces will travel 1" forapproximately 6.5 turns ofcrank handle.Hand crank allowsseated left- or righthandedusers to raiseor lower the monitorworksurface. Crankcan be stored awaywhen not in use.Worksurfaces have awood core with aTurnstone performancelaminate surface.User’s edge profile isPVC with a 3 mm radius.Back edge and edgethat joins to adjacentworksurfaces are 1 mmand finished with vinyl(PVC). PVC edge coloris an exact match tolaminate.Specifying, page 113–11440"27 5 /8" 10 1 /8"28 1 /4"22 1 /4"46"24"31 3 /16" 12 9 /16"28 1 /4"39 1 22/4"1 /4"22 1 32/4"1 /2"24"24"22 1 /4"45 1 /4"36"22 1 /4"22 1 /4"32 1 /2"Kick SystemMoving worksurfaces cancollide with other components.Don’t install overhead storage,desk-height power, communicationoutlets, or desk accessoriesin the path of adjustable-heightworksurfaces.Leveling glidesadjust to install uniton uneven floors.Optional shroud coverprovides an alternativeaesthetic. Shroud can bespecified, in any Kick paintcolor, feet will match.All adjustable-height worksurfacessupport a total of 150pounds. If the unit has two surfaces,the monitor surface willsupport up to 130 pounds and thekeyboard surface will support upto 20 pounds.Single worksurfaces are one piece toaccommodate single or multiple monitorsand a keyboard. You can adjust theheight of the worksurface from 26 1 ⁄8"Hto 39 1 ⁄2"H with the crank mechanism.Tip: Adjustable-height mechanismrequires assembly and attachment toworksurface.39 1 /2"26 1 /8"Bi-level worksurfaces are two nearlyequal pieces—a monitor worksurface,which can accommodate a 21" monitor,and a large keyboard worksurface. Usethe crank mechanism to adjust theheight of the monitor worksurface andthe height of the keyboard worksurface.These two adjustments are completelyindependent of each other and rangefrom 26 1 ⁄8"H to 39 1 ⁄2"H.Extension link worksurfaces connectto corner worksurfaces to providethe user with additional space. Anextension link worksurface attaches to asingle or bi-level corner worksurfaceand moves up or down in tandem withthe corner worksurface. Extension linkworksurface includes a gas cylinder inthe rear column.39 1 /2"26 1 /8"At least a 1 3 ⁄4" gap must separatebacks of a worksurface and panels toaccommodate cables and preventpinching. A 1" gap separates sides andadjacent furniture. There is also a 1 1 ⁄2"space between the keyboard and monitorsurfaces on units with two surfaces.1 3 /4"Crank drives worm screw in leg ofstraight single and corner single worksurfacesto raise or lower worksurface.Chain connects to height-adjustmentmechanism in adjacent leg so it movesup or down in sync with crank leg.Crank handle can be used in either leg.Chain connects height-adjustment mechanismson extension link worksurfacesand adjacent worksurfaces to allow userto adjust all worksurfaces simultaneouslywith one turn of the crank.1 1 /2"1"Turnstone Specification Guide 31