Turnstone Furniture Specification Guide

Kick SystemIntegrated Power andCommunication FactsIntegrated Power andCommunication FactsPower and communication componentscan be installed in holes cut onsite in any Kicktackable acoustical panel. Components canbe accessed from one side of the panel only.Specifying, page 82Kick SystemPower receptacle connects to panel powerwayat any powerway receptacle access location andaccesses line 1 only. Power receptacle can bespecified to function with any of the five Kick powerwaywiring schematics. Component complieswith New York City requirements for a fieldinstalledpower unit.Two holes must be cut intothe panel surface—one for thecomponent and one for theegress of cabling or powerharness at panel base.Junction box accommodates customer-suppliedvoice/data jacks and trim plate. Communicationmodule can be used for power in Chicago, wherelocal electrical code requires that power in thepanel base and the harness bringing power toworksurface height must be hardwired in the field.Power and communicationcomponents are field-installed tothe inside of the panel tubular frameat any user-specified location.Any locationInside of paneltubular frameAny heightAny heightPower harness connects to panelpowerway at receptacle location inbase cover.Communication cables enterbase cavity underneath base trim.Shroud, included withpower receptacle andcommunication module,conceals the egress ofcommunication cables orpower harness that exitsfrom the bottom of thepanel skin.Power receptacle includes three receptacles,each with trim plate. Communicationmodule includes communication housing.Customer must supply trim plate andvoice/data jacks for communication module.Turnstone Specification Guide 23