Turnstone Furniture Specification Guide

Kick SystemReceptacle FactsReceptacles are orderedseparately and installed in thefield in knockout opening.They plug into terminals on apowerway and are securedwith screws. Receptacles aredesigned to link to a specificcircuit.Specifying, page 812 3 /4"W5 1 /4"WReceptacleopening1 3 /8"HReceptacleopening1 3 /8"HStandardLargerAll receptacles are duplex (twooutlets) and are available in twosizes—standard and larger—andtwo versions—15-amp and 20-amp. Specific lines may be limitedto and fit only in specificreceptacle locations in the base.Smaller-size openings of thebase cover house only standard-sizereceptacle.Larger-size opening in thebase cover in 36"W through60"W panels house larger-sizeduplex receptacle with twooutlets. The larger opening isalways in the right-handposition.Numbers printed on the receptaclesindicate the line number.Label on receptacle indicateswhich circuit the receptacleconnects to, so the user cancontrol which devices are onspecific circuits.With the 3-circuit separateneutral system, these designationsare with letters A, B, orC as compared to 1, 2, 3, or 4 inthe other systems..Specific circuits are accessedthrough the powerway byinstalling the appropriate receptaclein the receptacle location.All five wiring schematics areavailable.Standard3-Circuit, SharedLarger1 2 33-Circuit, Separate Neutrals2A B C3+D1 2 343 +11 2 32+21 2434All the components inan electrical distributionnetwork must use the samewiring schematic. Componentsare color coded andkeyed to make it impossibleto connect mismatched parts.22 Turnstone Specification Guide