Turnstone Furniture Specification Guide

SeatingAdjustability Overview7 Jacket8 à la carte9 à la carte10 à la carte11 Let’s B131 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.2 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.3 Adjustable seatdepth via the backLoosen bolt, adjust backin or out to desired position,and retighten knob.4 Height-adjustablearmsTo raise arm, lift arm todesired height. To lowerarm, lift arm to its highestposition and then lower tobottom.5 Maintenance widthadjustablearmsLoosen screws under armbracket, adjust arm in orout, tighten screws.6 Upright back lockTo lock back in uprightposition, lean forwardand push lever back. Torelease back lock, leanforward and push leverforward.6245Swivel1 Pneumatic heightadjustment via thebackTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.2 Seat depthadjustment via thebackLoosen bolt and adjustback in or out to desiredposition. Retighten bolt.3 Adjustable backheightGrab chair back with bothhands and slowly pull upto desired height. To lowerback, pull up to highestposition, and back willdrop to lowest position.Reset mechanism bypushing down firmly, thenadjust upward.4 Height-adjustablearmsSqueeze trigger underarm cap and raise orlower arm to desiredheight. Release trigger.5 Maintenance widthadjustablearmsLoosen screws under armbracket, adjust arm in orout, tighten screws.21453Swivel Tilt31 1a1 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and twist leverclockwise. To lower chair,remain seated and twistlever clockwise.§ Upright back lockWhile in the upright position,push the lever in andthe chair will not tilt; pull itout and the chair can tilt.2 Seat depthadjustment via thebackLoosen bolt and adjustback in or out to desiredposition. Retighten bolt.3 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.4 Adjustable backheightGrab chair back with bothhands and slowly pull upto desired height. To lowerback, pull up to highestposition, and back willdrop to lowest position.Reset mechanism bypushing down firmly, thenadjust upward.5 Height-adjustablearmsSqueeze trigger underarm cap and raise orlower arm to desiredheight. Release trigger.6 Maintenance widthadjustablearmsLoosen screws under armbracket, adjust arm in orout, tighten screws.5624Synchro Tilt31 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.2 Seat depthadjustment via thebackLoosen bolt and adjustback in or out to desiredposition. Retighten bolt.3 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.4 Upright back lockTo lock back in uprightposition, lean forwardand push lever back. Torelease back lock, leanforward and push leverforward.5 Adjustable backheightGrab chair back with bothhands and slowly pull upto desired height. To lowerback, pull up to highestposition, and back willdrop to lowest position.Reset mechanism bypushing down firmly, thenadjust upward.6 Height-adjustablearmsSqueeze trigger underarm cap and raise orlower arm to desiredheight. Release trigger.7 Maintenance widthadjustablearmsLoosen screws under armbracket, adjust arm in orout, tighten screws.4167254162 31 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.2 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.3 Adjustable seatdepthLift lever up and hold, shiftseat forward or back, andrelease lever to lock.Available on modelsTS30602 and TS30604only.4 Upright back lockTo release, lean forwardand flip lever up. To lock,lean forward and flip leverdown.5 Arm heightPull trigger up and hold,pull arm up or push down,and release trigger tolock.6 Back heightDepress and hold buttons.Raise or lower back intodesired position, releasebuttons.5SeatingTurnstone Specification Guide 199