Turnstone Furniture Specification Guide

SeatingAdjustability OverviewTip: Your chair may notinclude all the adjustmentsshown.Style ReferenceNumber NumberTS30501 4TS30502 3TS30504 4TS30505 5TS30506 5TS30507 5TS30508 5TS30509 3TS30601 11TS30602 11TS30603 11TS30604 11TS31301 7TS31801 6TS31802 6TS38001 1TS38002 1TS38003 1TS38004 1TS38005 1TS38006 1TS38501 2TS38502 2TS38504 2TS38505 2TS38506 2TS38507 2TS38509 2TS38510 2à la carte 8à la carte Options:9, 101 Springboard14671 Seat angleadjustmentPull lever back and hold,shift seat to desired angle,and release lever to lock.2 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.3 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.4 Adjustable seatdepthPull lever forward andhold, shift seat forward orback, and release leverto lock.5 Upright back lockTo release, lean forwardand pull toward back. Tolock, lean forward andpush toward front.6 Arm heightPull trigger up and hold,pull arm up or push down,and release trigger tolock.7 Lumbar heightadjustmentLean forward, turn wheelsup to lower, and turnwheels down to raise.235672 Sonata1 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.2 Variable back stop(Three position stop)To release stop, pushlever forward. To stoprecline at various angles,lean back to desired angleand push lever back.3 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverout. To lower chair, remainseated and pull lever out.3 Surprise!5412 31 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.2 Seat angleadjustmentTo adjust seat angle, pulllever up and shift seat todesired angle. Push leverdown to lock into position.3 Adjustable backheightLoosen knob, raise orlower back to desiredposition, and retightenknob completely.4 Variable back lockTo adjust back angle, pulllever up and lean back todesired angle. Push leverdown to lock into position.31525 Height-adjustablearmsTo adjust height, turn knobon side of arm to desiredheight.4 Surprise!1 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.2 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.3 Adjustable seatdepth via the backLoosen knob, adjust backin or out to desired position,and retighten knobcompletely.5 Surprise!453B133A3B1 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.2 Adjustable seatdepth via the backLoosen knob, adjust backin or out to desired position,and retighten knobcompletely.214523 Adjustable backheightA.Models with back knob:Loosen knob, raise orlower back to desiredposition, and retightenknob completely.B. Models without back knob:Grab chair back with bothhands and slowly pull upto desired height. To lower,pull up to highest position,and the back will dropdown to lowest position.4 Maintenance widthadjustablearmsLoosen screws under armbracket, adjust arm in orout, tighten screws.5 Height-adjustablearmsTo adjust height, turn knobon side of arm to desiredheight.6 Executive 31811 Tilt tensionTo decrease tension, turncounterclockwise. Toincrease tension, turnclockwise.2 Pneumatic heightadjustmentTo raise chair, lift bodyweight up and pull leverup. To lower chair, remainseated and pull lever up.3 Upright back lockTo lock back in uprightposition, lean forward andpush lever in. To releasefor tilt, lean forward andpull lever out.23198 Turnstone Specification Guide