Turnstone Furniture Specification Guide

SeatingSeating Mechanisms and AdjustabilityFeatures DefinedSeating Mechanisms andAdjustability FeaturesDefinedSeating MechanismsAdjustability FeaturesKnee-Tilt MechanismChair swivels 360°, and seatand back recline in unison.The pivot point is forwardallowing the user’s feet toremain flat on the floor.Swivel-Tilt MechanismChair swivels 360°. Back andseat recline in unison.Adjustable Back HeightAllows the user to positionthe back up or down.Lumbar HeightAdjustmentAllows the user to raise orlower the lumbar support.Upright Back LockAllows the user to lock theback in the upright position.Posture-Tilt MechanismChair swivels 360°. Backreclines while seat remainsin a fixed position.Synchro-Tilt MechanismChair swivels 360°. Back andseat move together but atdifferent angles. For every 2degrees of back recline, theseat angle tilts 1 degree.Adjustable Foot RingAllows the user to positionthe stool foot ring up or down.Pneumatic HeightAdjustmentAllows the user to raise orlower the chair with onelever from a seated position.Variable Back StopAllows the user to stop theback recline at various points.SeatingSwivel MechanismChair swivels 360°. Seat andback stay in a fixed position(no recline).Adjustable Seat DepthAllows the user to changethe distance between thefront edge of the seat andthe chair back.Seat Angle AdjustmentAllows the user to positionand lock the seat angle in avariety of positions.Variable Back LockAllows the user to locate andlock the back in a variety ofpositions.Adjustable Seat Depthvia the BackAllows the user to changethe distance between thefront edge of the seat and thechair back via the maintenanceback adjustment.Tilt TensionAllows the user to vary theamount of recline resistance.Turnstone Specification Guide 197