11.07.2015 Views

Drip Irrigation Catalog - Netafim USA - Midwest Turf & Irrigation

Drip Irrigation Catalog - Netafim USA - Midwest Turf & Irrigation

Drip Irrigation Catalog - Netafim USA - Midwest Turf & Irrigation

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Landscape &<strong>Turf</strong> DivisionProduct<strong>Catalog</strong>(888) 638-2346 www.netafimusa.com


MISSIONLeading the way in drip irrigation since 1965.Our Mission is to create a global paradigmshift in the application and use of water withinthe Green industry. We will do this by providingtechnologically advanced and environmentallysound solutions to modern irrigation challenges, and bysupporting our customers with education,training and insight into theintelligent use of water.This year we are pleased to again advance the scienceof irrigation with an expanded line of precisiondrip irrigation products. For more detailsabout <strong>Netafim</strong> landscape and turf irrigationproducts or to request design or installationinformation, call our Customer Service department at(888) 638-2346 or visit our web site atwww.netafimusa.com.2<strong>Netafim</strong> <strong>USA</strong>


TABLE OF CONTENTSTECHLINE ® 3Introduction<strong>Drip</strong>perline 8-17Techline ® CV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9Techline ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11Techline ® for Reclaimed Water . . . . . . . . . . . . . . . . . . . . . .12-1317mm Techlite ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-158mm Techlite ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17<strong>Drip</strong>perline Accessories18-198mm Techlite Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Techline CV, Techline and 17mm Techlite Fittings . . . . . . . .18Operation/Pressure Indicator Stake for Techline . . . . . . . . .19Low Volume Control Zone Kit . . . . . . . . . . . . . . . . . . . . . . . . .19Filters20-23Techfilter ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21Disc Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23Controllers and Valves24-30Miracle ® Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Aqua Pro Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Aquanet ® Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27Automatic Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Pressure Regulator Valves . . . . . . . . . . . . . . . . . . . . . . . . . . .29Line Flushing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Air/Vacuum Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30<strong>Drip</strong>pers31-33PCDj <strong>Drip</strong>pers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Techflow <strong>Drip</strong>pers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32BD & WP Series <strong>Drip</strong>pers . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Polyethylene Tubing34Poly Swing Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Polyethylene Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Micro-Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Accessories4-7Succeed with the Leader in <strong>Drip</strong> <strong>Irrigation</strong> . . . . . . . . . . . . . . .4Our Landscape Product Offering . . . . . . . . . . . . . . . . . . . . . . .4Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4<strong>Drip</strong>perline Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Techline ® Kit for First-Time Users . . . . . . . . . . . . . . . . . . . . . . .5<strong>Drip</strong>perline Design Layouts . . . . . . . . . . . . . . . . . . . . . . . . . .6-735Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Micro-Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353<strong>Netafim</strong> <strong>USA</strong>


INTRODUCTIONSucceed with the Leader in <strong>Drip</strong> <strong>Irrigation</strong>!With more than 39 years of experience in drip irrigation for demanding agricultural applications,<strong>Netafim</strong> has also been pioneering innovations in drip irrigation for the landscape industry overthe past decade.This catalog presents our latest in drip irrigation technology forlandscape and turf. No matter what your projects require, ourcomprehensive product line delivers the solutions you needfor successful project completion and maintenance.From pressure compensating dripperline, like ourrevolutionary new Techline ® CV with built-incheck valves, to non-compensated dripperlinesuch as Techlite ® , we’ve got what you need.Our Landscape Product Offering• Subsurface irrigation for turf and shrub bed applications• On-surface irrigation for shrub bed applications• Point source drippers for wide spaced plants and container plantings• Controllers and valves for automatic irrigation control (residential and commercialapplications) including DC controls• Tools and accessoriesBeyond the depth of our product offerings, <strong>Netafim</strong> is the authority you can trust forunparalleled technical and customer support. We are here to help you succeed! We also offersome of the best warranties (see below) in the industry, so you can rest assured knowing yourprojects will continue to please even your toughest customers for the long haul.We have included charts in each section that simplify the ordering and specifying process, butshould you ever have any questions, just call Customer Service at 888.638.2346 and we will bedelighted to assist you.Warranty InformationBasic Manufacturer’s Limited Warranty<strong>Netafim</strong> products are warranted to be free from defects in material and workmanship for a periodof one (1) year from the date of delivery.Limited Warranty for <strong>Drip</strong>pers<strong>Drip</strong>pers are warranted to be free from defects in materials and workmanship for two (2) yearsfrom the date of shipment from <strong>Netafim</strong>.Limited Warranty for <strong>Drip</strong>perlines<strong>Netafim</strong> warrants any polyethylene tubing and dripperlines (Techline CV, Techline ® and Techlite)sold to be free from environmental stress cracking for a period of seven (7) years from the dateof original delivery.A complete copy of <strong>Netafim</strong>’s warranty is available by contacting <strong>Netafim</strong> customer serviceat 888.638.2346.4<strong>Netafim</strong> <strong>USA</strong>


DRIPPERLINE CALCULATIONSINTRODUCTIONFIRST-TIME USERSKIT FOR TECHLINE ® DRIPPERLINEApplications• First-time users – everything you need to get startedFeatures/Benefits• Includes all of the basic components• Helps first-time users design and installa complete system – all components, videoand instructions are included• Excellent choice for contractors or homeownersnew to dripperline irrigation technologyTechline KitIncludes everything you need to tryout a complete system.Each Kit Contains• 250' Techline• 25 TLTEE Tees• 25 TLELL Elbows• 10 TL075MA Male Adapters• 10 TLCOUP Couplings• 10 TL075FTEE Combination Tees• 100 TLS6 Staples• Flush Valve TLFV-1• Air/Vacuum Relief Valve TLAVRV• Low Volume Control Zone LVCZ10075-LFincludes 1" 24 VAC Valve, 3/4" 140 Mesh Filterand 3/4" PRV075LF45 Pressure Regulator• Instructions and “Design, Installation andMaintenance” VideoNEW5<strong>Netafim</strong> <strong>USA</strong>


DRIPPERLINEDESIGN LAYOUTSFor Techline ® CV, Techline ® and Techlite ® <strong>Drip</strong>perline Systems<strong>Netafim</strong> offers comprehensive design information for <strong>Irrigation</strong> Specifiers and Contractors, as wellas design and installation videos and design details on disk for CAD and PC. For more information,call 888-NETAFIM (888-638-2346) or visit our website at www.netafimusa.com.SAMPLE DESIGN LAYOUTSCENTER FEEDFor applications in medians or islands, usecenter feed configuration for long narrow areas.END FEEDEnd feed configurations are generally usedfor short or medium length installations.CONTOURS<strong>Drip</strong>perlines provide a flexible solution forirrigating around contoured areas and aroundconfined planters or shrubs.LATERAL PLACEMENTPlace laterals 2" from any hardscape or 4" fromthe outside of uncontained landscapes. Placelaterals perpendicular to (across) slopes, if any.TECHLINE ® , TECHLINE ® CV ANDTECHLITE ® ON-SURFACE LAYOUT6<strong>Netafim</strong> <strong>USA</strong>StaplesUse 1 TLS6 staple for:• Every 3' of dripperline in sand, every 4' in loamand every 5' in clay.• Use 2-staples over each tee, elbow or cross.Caution – Landscape fabric staples andother non-stainless steel staples rust quicklyand are not recommended.Line Flushing ValveUse one Line Flushing Valvefor every 15 GPM of zone flow.• TLSOV or TLFIG8 may be substituted.• Position as near as possible to thehalf-way point of the loop.• Install in an area where flushingabout one gallon of water will notcause flooding.Pressure Regulating Valve (PRV)Install after the zone valve and filter.With Techline, use:• PRV075LF45V2K from .25 to 4.4 GPM• PRV075HF45V2K from 3.5 to 20 GPMWith Techlite, refer to the appropriate AverageFlow Rate chart to match the PRV with thedesired dripper flow rate.FilterPlaced before or after the zone valve.Size the filter based on zone flow:• 3/4" filter – up to 17 GPM• Use 120 or 140 mesh• <strong>Netafim</strong> sells a large variety offilters – up to 6,500 GPM – Call <strong>Netafim</strong>Customer Service for more information.Start rows 2" fromhardscapes and 4"from softscapes.Low Volume Control Zone KitFor easy installation of a valve/filter/PRV use <strong>Netafim</strong>’sLow Volume Control Zone Kit. Two models are availablefeaturing a pre-assembled 1" valve, 3/4" filter and eithera LF PRV (0.25 - 4.4 GPM) or HF PRV (3.5 - 17.6 GPM).


DRIPPERLINE DESIGN LAYOUTSTECHLINE ®CV SUBSURFACE LAYOUTLow Volume Control Zone KitFor easy installation of a valve/filter/PRV use<strong>Netafim</strong>’s Low Volume Control Zone Kit. Twomodels are available featuring a pre-assembled1" valve, 3/4" filter and either a LF PRV(0.25 - 4.4 GPM) or HF PRV (3.5 - 17.6 GPM)Pressure Regulating Valve (PRV)Install after the zone valve and filter.• Use PRV075LF45V2K from 0.25 - 4.4 GPM• Use PRV075HF45V2K from 3.5 - 17.6 GPM• Use PRV15045V2K from 7 - 35 GPMSupply and Exhaust HeadersMost often used in subsurfacesystems. They may not benecessary if Techline CV islaid on-surface. Use Techlineor Techline CV Blank Tubingas supply and exhaust headerson zones under 5 GPM.FilterPlaced before or after the zone valve.• 3/4" filter - up to 17 GPM• 1" filter - up to 26 GPM• 11/2" Filter - up to 35 GPM• Use 120 or 140 mesh• <strong>Netafim</strong> sells a large variety offilters – up to 6,500 GPM – Call <strong>Netafim</strong>Customer Service for more information.Start rows ofTechline CV 2" fromhardscapes and 4"from softscapes.StaplesUse 1 TLS6 staple for:• Every 3' of Techline CV in sand,every 4' in loam and every 5' in clay.• Use 2 staples over each tee, elbow or cross.Caution – Landscape fabric staples andother non-stainless steel staples rust awayquickly and are not recommended.Line Flushing ValvesUse TLSOV or TLFIG8.• Normally placed alongexhaust header or atthe point farthest awayfrom the source.• Install in a valve boxwith a gravel sump.• An automatic lineflushing valve may beused but some watermay drain from it afterzone shutdown.TECHLINE ®SUBSURFACE LAYOUTPVC, Poly (for zones under5 GPM use Techline or blankTechline) Supply Header andExhaust HeaderAir/Vacuum Relief Valve(for subsurfaceinstallations only)Valve, Filter(or Techfilter) andPressure RegulatorLine Flushing Valve7<strong>Netafim</strong> <strong>USA</strong>


TECHLINE ® CVSUBSURFACE OR ON-SURFACE DRIPPERLINECombines the best of Techline and adds a check valve (CV). The most importantbreakthrough in low-volume irrigation since the introduction of drip.Applications• Subsurface or on-surface installations• Slopes• Curved, angular or narrow planting areas• High traffic/high liability areas• Areas subject to vandalism• High wind areas• <strong>Turf</strong>, shrubs, trees and flowers• At-grade windows• Sports turf• Tennis courtsSpecifications• Broadest choice of dripper flow rates:0.26, 0.4, 0.6 and 0.9 GPH• <strong>Drip</strong>per spacings: 12", 18" and 24"• Pressure compensation range: 14.7 to 70 psi(stainless steel clamps recommended above 50 psi)• Maximum recommended system pressure: 50 psi• Minimum pressure required: 14.7 psi• Tubing diameter: 0.66" OD; 0.56" ID• Coil length: 100', 250', 1,000'• Recommended filtration: 120 meshFeatures/Benefits• Each dripper has a 2 psi check valve – all drippersturn on and off at the same time- Minimizes water loss- Holds back up to 41/2' of water (elevation change)- No low drainage, great on slopes- More precise watering• Built-in physical root barrier – drippers areprotected from root intrusion without chemical reliance• Pressure compensation – all drippers deliver equal flow• Unique flow path – Turbonet technology allows morecontrol of water flow and less chance for clogging• Continuous self-flushing dripper design – flushes debrisas it is detected – throughout operation, not just at thebeginning or end of a cycle and ensures uninterrupteddripper operation• Extremely large filter area – provides uninterruptedwater flow• Single hole dripper outlet from tubing- Better protection against root intrusion- Allows the dripperline to be used in subsurfaceapplications without chemical protection• Easy to design in slope and berm applications – waterdoes not drain out of low drippers• No air/vacuum relief valves required – installationsare faster and less expensive• Techline compatible• Techfilter compatible – provides a limited lifetimewarranty against root intrusionEXPLODED VIEW OFTECHLINE CV DRIPPEREdge iswelded tothe tubingwall<strong>Drip</strong>perCoverRaised inletwith root barrierDiaphragmFlow PathPressureCompensatingChamber8<strong>Netafim</strong> <strong>USA</strong>Filtration Surface (not shown),bottom-side of dripper


TECHLINE ® CV DRIPPERLINE9<strong>Netafim</strong> <strong>USA</strong>


TECHLINE ®SUBSURFACE OR ON-SURFACE DRIPPERLINEThe world’s most advanced continuousself-cleaning, pressure-compensating dripperline.EXPLODED VIEWOF TECHLINE DRIPPEREfficiently ShortFlow PathSelf-Flushing, FreeFloating Diaphragmflushes dripper anytimeduring operationApplications• Subsurface or on-surface installations• Curved, angular or narrow planting areas• High traffic/high liability areas• Areas subject to vandalism• High wind areas• <strong>Turf</strong>, shrubs, trees• Slopes• At-grade windows• Sports turfFeatures/Benefits• Pressure compensating• Efficient, short flow path• Continuous self-cleaning design resists clogging• Self-flushing/cleaning, elastomer diaphragm• Unique design with physical root barrier helpsprevent root intrusion• Self-contained, one-piece construction assuresreliability, easy installation• 12", 18" or 24" dripper spacing and blanktubing available• Flexible tubing adapts to any planting area shape• UV resistant• Labels on rolls denote flow rate and spacing• Tubing indelibly marked with flow rateTurbonetTechnologywider crosssectionallowslarge particlesthrough flow pathTECHLINE DRIPPEROPERATIONTechline’s Self-Cleaning,Pressure Compensating<strong>Drip</strong>per is a fully selfcontainedunit molded tothe interior wall of thedripper tubing itself. Bothtubing and dripper housingare manufactured fromhigh-quality syntheticelastomers to withstandchemicals and fertilizers.As shown at right, Techlineis continuously self-cleaningduring operation, not just atthe beginning and end of acycle. The result is dependable,clog-free operation,year after year.Inlet Filter1.2.3.4.Physical Barrieron back of dripperPressureCompensatingBath andOutlet1. Regulating mode2. Initiation offlushing cycle3. Flushing cycle4. Regulating modeSpecifications• <strong>Drip</strong>per flow rates: 0.4, 0.6 or 0.9 GPH• Pressure compensation range: 7 to 70 psi(stainless steel clamps recommended above 50 psi)• Maximum recommended system pressure: 50 psi• Tubing diameter: 0.66" OD; 0.56" ID• Coil Length: 100', 250', 1,000'• Recommended filtration: 120 mesh• Bending radius: 7"• Tubing material: Linear low-density polyethylene10<strong>Netafim</strong> <strong>USA</strong>


TECHLINE ®DRIPPERLINE11<strong>Netafim</strong> <strong>USA</strong>


TECHLINE ®FOR RECLAIMED WATERPRESSURE COMPENSATING DRIPPERLINEPurple-colored dripperline warnsof the use of non-potable water.Applications• Reclaimed (recycled) water useSpecifications• Manufactured in purple for non-potable water sources• <strong>Drip</strong>per flow rates: 0.4, 0.6 and 0.9 GPH• Pressure compensation range: 7 to 70 psi• Maximum recommended system pressure: 50 psi• Tubing diameter: 0.66" OD, 0.56" ID• Water passage dimensions:0.4 GPH: .044" depth, .044" width, .760" length0.6 GPH: .048" depth, .048" width, .610" length0.9 GPH: .052" depth, .052" width, .610" length• Recommended filtration: 120 Mesh• Uses 17mm fittings and accessories• Coil length: 1,000'Features/Benefits• Utilizes a patented technology based on a uniquepressure differential mechanism which provides highemission uniformity and a clog-resistant design• Provides design flexibility and superior uniformityfor irrigation with non-potable/reclaimed water andsoil loading• Patented, continuous self-flushing, free-floatingdiaphragm allows the dripper to cleanse itselfanytime during operation• Designed with a very large Turbonet flow path,allowing particles to pass freely• Each emitter is raised .26" from the wall of thedripperline to prevent sediment from enteringthe dripper when the system is not in operation• Chemical and wear resistant, maintaining its designflow over many years of use12<strong>Netafim</strong> <strong>USA</strong>


TECHLINE ®FOR RECLAIMED WATER DRIPPERLINE13<strong>Netafim</strong> <strong>USA</strong>


17mm TECHLITE ®ON-SURFACE, NON-PRESSURE COMPENSATING DRIPPERLINEApplications• For on-surface installations only• Under mulch• Large sized irrigation zones• Shrub beds• Narrow planting areasFeatures/Benefits• Non-pressure compensating• Large, efficient turbulent flow path• Self-contained, one piece construction assuresreliability and easy installation• Tubing flexibility adapts to any planting shape• UV resistant• 12", 18" dripper spacing and blank tubing available• On-surface installation – less labor, more profit• Internal dripper eliminates labor to attach drippersand micro-tubing• No clamps required below 50 psiSpecifications• <strong>Drip</strong>per flow rates: 0.5 or 1.0 GPH (nominal @ 15 psi)• Uses 17mm fittings• Non-pressure compensating range: 12 to 50 psi• Maximum recommended system pressure: 50 psi• Recommended filtration: 120 mesh• Maximum lateral length: (see chart p. 15)• Tubing diameter: 0.66" O.D., 0.56" I.D.• Tubing material: Linear low density polyethylene• Coil Lengths: 100', 250', 1,000’• Bending radius: 7"14<strong>Netafim</strong> <strong>USA</strong>


17mm TECHLITE ®DRIPPERLINE15<strong>Netafim</strong> <strong>USA</strong>


8mm TECHLITE ®ON-SURFACE, NON-PRESSURE COMPENSATING DRIPPERLINEApplications• For on-surface installations only• Under mulch• Small sized irrigation zones• Shrub beds• Narrow planting areasFeatures/Benefits• Non-pressure compensating• 6", 12" dripper spacing and blank tubingavailable• 60% smaller diameter than 17mm Techlite –less noticeable for on-surface installations• Large, efficient turbulent flow path dripper• Self-contained, one piece construction assuresreliability and easy installation• Tubing flexibility adapts to any planting shape• UV resistant• On-surface installation – less labor, more profit• No clamps required below 25 psiSpecifications• <strong>Drip</strong>per flow rate: 0.5 GPH (nominal @ 15 psi)• Uses 8mm Techlite fittings• Operating pressure range: 5 to 25 psi• Maximum recommended system pressure: 25 psi• Recommended filtration: 120 mesh• Maximum lateral length: (see chart at right)• Tubing diameter: 0.26" O.D., 0.24" I.D.• Tubing material: Linear low density polyethylene• Coil Length: 100', 1,000'• Bending radius: 2"Features/Benefits• Non-pressure compensating• 6", 12" dripper spacing and blank tubing available• 60% smaller diameter than 17mm Techlite – lessnoticeable for on-surface installations• Large, efficient turbulent flow path dripper• Self-contained, one piece construction assuresreliability and easy installation• Tubing flexibility adapts to any planting shape• UV resistant• On-surface installation – less labor, more profit• No clamps required below 25 psi16<strong>Netafim</strong> <strong>USA</strong>


8mm TECHLITE ®DRIPPERLINE17<strong>Netafim</strong> <strong>USA</strong>


DRIPPERLINEFITTINGS AND ACCESSORIESApplications• Fits Techline ® CV, Techline ® andTechlite ® <strong>Drip</strong>perlinesFeatures/Benefits• Barbed fittings for secure fit and easyinstallation without glue or tools• Maximum recommended systempressure: 50 psi; 8mm fittings: 25 psi• UV resistant• Durable one-piece construction• Allows for easy on-site inspectionof proper fitting installationTLCOUPInsert CouplingTLELLInsert ElbowTLTEEInsert TeeTL2W075MA3/ 4" MPT“V” 2-Way InsertTLIAPE-BInsert Adapter for1" or Larger PE(requires 11mm or7/ 16" punch)TLDPLUG<strong>Drip</strong>per Plug RingTLMTUBEADP<strong>Drip</strong>per Micro-TubingAdapterSLCOUPInsert CouplingSLTEEInsert TeeSL050FA1/ 2" FemaleAdapterSL050FTEE1/ 2" FemaleCombination TeeEND CAP*8mm Techlite can beattached to blankTechline tubing.*End Cap can be made from Techline CV, Techline or17mm Techlite <strong>Drip</strong>perline by folding 8mm Techlitetubing over twice and sliding 11/4" cut section overthe end.TLCROSInsert CrossTL050MA1/ 2" Male AdapterTL075MA3/ 4" Male AdapterTLFIG8TL075FTEECombination TeeIns x Ins x 3/4" FPTTLIAPVC-BInsert Adapterwith Grommet for11/2" or Larger PVC(requires TDBIT16.5)TDBIT16.5Drill bit for PVC –TLIAPVCFigure 8 Line EndTLS66" Soil Staple(Place approximately every3' of tubing, plus two oneach tee, elbow or cross.)TLSOVShut-Off ValveIns x InsTLCVInline Check Valve0.9-4.4 GPMClosing Pressure5.7 psiOpening Pressure7.1 psiFPT = Female Pipe ThreadMPT = Male Pipe ThreadIns x Ins = Insert by Insert18<strong>Netafim</strong> <strong>USA</strong>


OPERATION/PRESSUREINDICATOR STAKEFor use with Techline ® SystemsApplications• For Techline systemsFeatures/Benefits• Provides quick visual confirmation of system operation• Flag rises to indicate system operation and minimum10 psi system operation• Answers the question “Is the system working?”Specifications• Flag position:Down (closed) position = 4.5 psi or lowerHalfway position (45˚) = 7 psiUpright (open) position (90˚) = 10 psi or greater10-F-01OPERATION/PRESSUREINDICATOR STAKEThe set includes: operating/pressureindicator flag, anchoring stake andtubing/adapter. When the zone is on,pressure causes the flag to rise.At a pressure of 10 psi and higher,it is at a 90˚ angle. At 7 psi, it is at a45˚ angle. When the pressure eitherdrops below 4.5 psi or the systemis off, the flag is in a down position.LOW VOLUME CONTROLZONE KITSLOW FLOW AND HIGH FLOWApplications• Designed for all dripperline, drip and micro-spray zones• Use on zones between 0.25 and 17.6 GPMFeatures/Benefits• Valve, filter and pressure regulator are completelyassembled, saving installation and labor costs• Compact design allows easier access into valve box• Wide range of flow• Disc filter design provides 25 square inches offiltering surfaceSpecifications• Regulator: Low Flow: 0.25 to 4.4 GPMHigh Flow: 3.5 to 17.6 GPMPressure Rating: 145 psiPre-Assembled Valve, Filter andPressure Regulator In One Convenient KitLOW VOLUMECONTROL ZONE KIT – LOW FLOWLVCZ10075-LF0.25 - 4.4 GPM• Filter:• Valve:140 meshFlow Range: 0 to 17 GPMLow Flow Range: 30 GPMHigh Flow Range: 0.1 to 30 GPMPressure Rating: 150 psiLOW VOLUMECONTROL ZONE KIT – HIGH FLOWLVCZ10075-HF3.5 - 17.6 GPM19<strong>Netafim</strong> <strong>USA</strong>


TECHFILTER ®TECHLINE CV ® AND TECHLINE ® DRIPPERLINEThe Guaranteed Root Intrusion TerminatorTECHFILTERSYSTEMApplications• Recommended for use with all new Techline CVand Techline subsurface installationsFeatures/Benefits• Helps eliminate root intrusion• Replaceable Techfilter cartridge allows for renewalof protection• Evenly delivers a low concentration of trifluralinto all drippers throughout the system• Sealed packaging dramatically extends shelf lifeand adds to filter replacement convenience• Easy, no-touch installation and replacement oftrifluralin disc rings• Provides ultra-efficient water filtration withperformance far superior to screen-type filters• Renewable warranty, activated when filtercartridges are installed and registered, givesthe opportunity for a lifetime of protection• Recommended filtration: 120 mesh• Maximum pressure: 140 psiINSURANCE AGAINSTROOT INTRUSION.Our revolutionaryTechfilter protectsagainst roots invadingthe system. Here’s howit works: Trifluralin isincorporated into thereplacement disc ringassemblies inside the filterhousing. When water passesthrough the filter, a very lowconcentration of trifluralin(parts per billion) is transmittedthroughout the system. Thistechnology provides very preciseand even distribution of trifluralin throughoutthe piping network and effectively inhibitsroot growth into the dripper outlets.Exclusive <strong>Netafim</strong> <strong>USA</strong>Techfilter Limited LifetimeExtended Warranty.Every <strong>Netafim</strong> Techfilter carries a2-Year-to-Lifetime Warranty. Proper useand timely replacement of the cartridge willkeep the Lifetime Extended Warranty in force.TECHFILTEREXTENDED WARRANTYReplaceable Techfilter disc cartridges come inconveniently sealed packages which have two benefits:extended shelf life and simple, clean replacement of thecomplete cartridge without having to touch the rings.NOTE: Techfilter with Techline CV or Techline <strong>Drip</strong>perlineis sold together for use on a new installation. Techfilter issold as part of a system and cannot be sold without theproper amount of dripperline.20<strong>Netafim</strong> <strong>USA</strong>


TECHFILTER ®3/4"1"1" LONG1 1 /2" LONG2"21<strong>Netafim</strong> <strong>USA</strong>


DISC FILTERSWITH REPLACEMENT FILTER RINGSApplications• Residential• Commercial• Municipal• InstitutionalFeatures/Benefits• Highly effective multiple disc filter design• Simple, easy and thorough filter cleaning• Low friction loss• 3/4" model available with or without manualshut-off valve• 100% thermoplastic discs provide extremelyhigh corrosion resistance• Color-coded replacement filter rings available• Extra large filtration capacity means lessfrequent cleaning• Maximum pressure: 140 psi2"1 1 /2"LONG1 1 /2"1"3/4" WITHSHUT-OFF VALVE3/4"2" COMPACTDISC-KLEENAUTOMATIC FILTERWith a built-in controller(automatically senses whenthe filter needs to be cleaned).Can be mounted anywhere andrequires no electrical hook-up.Standard Model: 30-80 GPMLow Flow Model: 20-40 GPMDF SERIESDISC FILTER RINGS80 Mesh (Yellow), 120 Mesh (Red),140 Mesh (Black), 200 Mesh (Green)22<strong>Netafim</strong> <strong>USA</strong>


DISC FILTERS23<strong>Netafim</strong> <strong>USA</strong>


MIRACLE ®CONTROLLERS6, 9 and 12 Stations, AC and DC ModelsApplications• Residential• Commercial• Miracle DC: Recommended for areas withoutavailable power and for regions prone tolightning strikes or power outagesMIRACLE ACMIRACLE DCComes standard withindoor cabinet25-MRP-PROF-CABProfessional indoor oroutdoor cabinet shownwith Miracle installedFeatures/Benefits• Miracle DC: May be either connected toan external AC transformer or batteryoperated – see Battery Power Consumptionchart for battery life• 3 independent programs• 4 start times• Internal circuit board protection eliminatesneed for fuses or circuit breakers (AC only)• Battery life (AC only) provides up to 100 hoursprotection• Automatic stop at “off” position whenscrolling for easier programming• Self-diagnostic testing of individual stationsto detect, skip over and notify you of shortcircuits• Station run times: 1 minute to 9 hours,59 minutes – in 1 minute increments• 7 day schedule, calendar or interval• 10%-200% water budgeting• Rain/Soil Moisture Sensor input• Up to 99 day rain delay• Manual start override• Miracle DC: Power conserving “sleep mode”:5 minutes from user’s last touch, the displaywill turn off. Touching any button or turningthe dial will reactivate the display• Miracle DC: Indoor cabinet, standard25-MIRPEDMIRACLE DCCONTROLLERon outdoor pedestal.Lockable pedestalcover shown at left.Motorola Miracle Controllersare manufactured exclusivelyfor <strong>Netafim</strong> by Motorola,meeting the same stringentstandards of quality andreliability as Motorola cellularphones, pager units andhighly sophisticatedemergency equipment.Specifications• Miracle AC Transformer input:120 Volt, 12 VAC, 60 Hz• Miracle DC Internal Battery for operation:9V Alkaline or 9V Lithium• Miracle DC: Optional external battery• Miracle DC: Utilize <strong>Netafim</strong> Aquanet DC Valves(see page 26) or any other 12 VDC latchingsolenoid valve• Rain shut off must be “normally open”24<strong>Netafim</strong> <strong>USA</strong>


AQUA PROCONTROLLERSingle Station Battery Powered Controller for UseWhen an Extra Controller and Valve are NeededApplications• For applications where power is unavailable• Single station systems or wherever an extravalve is needed• Where an extra controller station is neededFeatures/Benefits• 9 volt battery powered controller and valveserves any application where power is notavailable or affordable• Four program modes provide programmingflexibility to meet almost any irrigation schedule:– One run time, one start time everyday– One run time, one start time, up to 7 active days– One run time, 3 start times, up to 7 active days– Manual operation• Easy access, four button programming• Waterproof and vandal proof – mounts inside valvebox for added protection• Remote location operation – up to 300' from valveusing #16 wire• Mounting options include bracket for 3/4" PVC pipeand wall adapterAQUA PROCONTROLLERSingle Station Controllerused with 1" or 3/4" AquanetValve – see page 26 formore information aboutAquanet Valves.SINGLE STATIONCONTROLLEROperates DC Solenoid ValvesSpecifications• Waterproof: IP67• Five operating modes:– once per day– once per day with selected days in the week– three times per day with selected days in a week– manual operation– off• Minimum running time: 1 minute• Maximum running time: 11 hours, 59 minutes• 9 volt battery (not included)• 2 – 1.5 volt LR1130 batteries (included)• Materials:– body: ABS– display window: Satoprene• Electronic:– voltage output: 13VDC– pulse width: 200 m/sec.– capacity: 400µF• Operating temperature: 32˚ F to 122˚ F• Storage temperature: 14˚ F to 140˚ F25<strong>Netafim</strong> <strong>USA</strong>


AQUANET ®DIRTY WATER VALVESApplications• Recommended for use with the <strong>Netafim</strong>Miracle DC Controller and Aqua Pro Controller• Any dirty or clean water applicationFeatures/Benefits• Industry’s first motorized DC Valve• 3/4", 1", 11/2" and 2" sizes• Clog-proof non-continuous metering 3-wayoperation assures trouble-free operation in allwater conditions• Internal bleed keeps valve box dry• Unique design – glass reinforced nylon body• Metering orifices are 2mm, making the valveextremely debris-resistant• Standard with flow control• 3-position control dial allows automatic (controlleractivation), manual or closed operationSpecifications• Female threaded connection• Operates with any 9 to 14 volt DC Pulse Signal(latching type solenoid)• Operating pressure range: 3 to 150 psi• Flow range:0.1 to 28 GPM ( 3/4" and 1")1 to 175 GPM (11/2" and 2")• Black wire = CommonRed wire = Power• Controller to Aquanet wire run lengths:- 12 gauge: 3,150' - 18 gauge: 780'- 14 gauge: 1,950' - 20 gauge: 480'- 16 gauge: 1,230'AQUANET DC VALVESAQUANET PRESSUREREGULATOR KIT(DC models only) The easy to install kit canbe added to any 1 1 /2" or 2" Aquanet DC Valve.An easy to set dial allows pressure to beset without gauges or tools.AQUANET VALVESOrdering Information26<strong>Netafim</strong> <strong>USA</strong>


AQUANET ®DIRTY WATER VALVES27<strong>Netafim</strong> <strong>USA</strong>


AUTOMATICVALVESStructural Simplicity andSuperior Hydraulic PerformanceApplications• Residential, light commercial, commercial,municipal, golfCast Iron and Bronze ValvesFeatures/Benefits• Cast iron – protective polyester coating is resistantto corrosive elements• Bronze – designed to resist cavitation whereextreme flow velocities exist• Unique design allows a straight flow pattern withlow friction loss• Equipped with direct sealing diaphragm• Maximum operating pressure: 230 psiElectric Throttling ValvesFeatures/Benefits• Durable glass reinforced nylon construction withflow control• No moving parts in the flow path or control loop –no maintenance• Standard with built-in solenoid for ease of operationand reliability• Simple to install – vertically or horizontallyElectric Throttling ValvesSpecifications• Available sizes: 1", 11/2", 2" and 3"• Maximum operating pressure: 145 psi• Maximum water temperature: 140º F• Female threaded connection• Electrical specifications:Standard – 24 VAC, 60 HzInrush current – 29mAHolding current – 14mACAST IRONAND BRONZEVALVESELECTRICTHROTTLINGVALVES28<strong>Netafim</strong> <strong>USA</strong>


PRESSUREREGULATOR VALVESApplications• All irrigation systemsFeatures/Benefits• Provides constant outlet pressure• Sealed regulating unit for each pressure option(except 3/4" low flow)• Easy inline assembly• Female inlet and outlet on low flow model• Female inlet, male outlet in 3/4" high flow model• Built-in indicator on 3/4" high flow and larger modelsshows when proper outlet pressure is achievedSpecifications• 3/4" low flow model: 0.25 to 4.4 GPM• 3/4" high flow model: 3.5 to 17.6 GPM• 11/2" model: 7 to 35 GPM• Maximum pressure: 145 psi• Other models available up to 500 GPM3/4"HIGH FLOW3/4"LOW FLOWEXPLODEDVIEW OF3/4" HIGHFLOWVALVEwithReplaceablePressureRegulatingUnitFPT = Female Pipe ThreadMPT = Male Pipe Thread1 1 /2"29<strong>Netafim</strong> <strong>USA</strong>


LINE FLUSHINGVALVES FOR TECHLINE ® AND 17mm TECHLITE ® SYSTEMSOptimize System PerformanceApplications• <strong>Drip</strong> irrigation systems• Clean or dirty waterFeatures/Benefits• Flushing reduces sediment build-up• Automatic cleaning operation at start of eachirrigation cycle• Unique design reacts to flow, not pressure, allowingoperation even at full line pressure• Can be disassembled to allow for winterization “blowout”Specifications• Flushing water volume: approx. 1 gallon per cycle• Maximum zone flow rate per Flush Valve: 15 GPM• Minimum pressure required: 1.5 psi• Maximum pressure: 57 psiMPT = Male Pipe ThreadTL050MFV-1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;After flushing, the valvecloses. Normal systemoperation begins.TLFV-1Diaphragm in openposition allows flushing.;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;As irrigation starts, valveflushes out dirt particlesin the open position.AIR/ VACUUMRELIEF VALVEEliminates Negative Pressure in Subsurface InstallationsApplications• Install in subsurface Techline zonesFeatures/Benefits• Eliminates vacuum that could drawcontaminants into the piping system• Non-corrosiveTLAVRVSpecifications• Maximum pressure: 140 psi• 1/2" male threaded connection• Not required for on-surface installations30<strong>Netafim</strong> <strong>USA</strong>MPT = Male Pipe Thread


PCDjDRIPPERSApplications• Can be used with blank polyethylene tubing,Techline ® CV, Techline ® , Techlite ® , other PC andnon-PC dripperlines• Can be used in piping networks with wide pressurevariations• Can be installed on-surface or subsurface• Wide-spaced plantings• Trees• Hanging baskets• Flower boxes• Planters or potsFeatures/Benefits• Unique Turbonet design regulates flow and providescontinuous self-cleaning action during operation• Delivers the same flow from 7 to 50 psi• Can be used with Techline CV dripperline withoutcausing dripperline drainage• 1.5 psi internal check valve helps prevent drainageand holds back up to a 31/2' column of water• Anti-siphon operation prevents contaminants frombeing drawn into dripper• <strong>Drip</strong>per body is color-coded denoting flow• Small profilePressure Compensating ContinuousSelf-Flushing <strong>Drip</strong>pers with Check Valve(Shown below slightly larger than actual size)All <strong>Netafim</strong><strong>Drip</strong>pers have thiseasy-to-identifyshape on the inletend of the dripper.0.5 GPH RED1.0 GPH GRAY2.0 GPH GREENSpecifications• Flow rates: 0.5, 1.0 or 2.0 GPH• Pressure compensation range: 7 to 50 psi• Maximum pressure: 50 psi• Barb inlet x .160" barb outlet• Uses .160" x .220" micro-tubing (Model EDTUBE)• Recommended filtration: 120 mesh31<strong>Netafim</strong> <strong>USA</strong>


TECHFLOWDRIPPERSPressure Compensating ContinuousSelf-Cleaning <strong>Drip</strong>pers with Check ValveApplications• Can be used in piping networks with a widerange of pressure variations• Can be used either on-surface or subsurface• Wide-spaced plantings• Planters or potsFeatures/Benefits• Unique design regulates flow and providesself-cleaning action• 5.0 psi internal check valve prevents lowpressure drainage• Anti-siphon operation prevents contaminantsfrom being drawn into dripper• Color-coding denotes flowWPCTWPBCBUG CAPPC DRIPPERSWPBA BARBEDADAPTERSpecifications• Flow rates: 0.5, 1.0 or 2.0 GPH: 6.0 GPH on WPCT• Pressure compensation range: 7 to 60 psi• Uses .160" x .220" micro-tubing (Model EDTUBE)• Maximum pressure: 60 psi• Recommended filtration: 120 mesh2.0 GPH GREEN 1.0 GPH BLACK 0.5 GPH REDWPC DRIPPERSFPT = Female Pipe Thread32<strong>Netafim</strong> <strong>USA</strong>


BD & WPSERIES DRIPPERSNon-Pressure Compensating <strong>Drip</strong>persApplications• Use in piping networks with limited pressure variation• Planters and pots• Wide-spaced plantingsFeatures/Benefits• Wide turbulent flow passage resists clogging• Barb inlet provides for easier installations• Color-coding denotes flowSpecifications• Flow rates: 0.5, 1.0 or 2.0 GPH• BD and WP models use .160" x .220" micro-tubing(Model EDTUBE)• Maximum pressure: 40 psi• Recommended filtration: 120 meshBD DRIPPERSWP DRIPPERS33<strong>Netafim</strong> <strong>USA</strong>


POLYETHYLENETUBINGFlexible, Thick-walled Polyethylene PipeConnects Rotors and Sprayheads toLateral PipesNEWPOLY SWING PIPEApplications• Connects sprayheads and rotors to lateralpiping networks• Provides flexible, durable transition from pipesto sprinklers or drippers and dripperline• Positions sprinklers in hard-to-reach areasFeatures/Benefits• Extremely flexible polyethylene formula makes fittinginsertion easy in hot or cold weather• Hatch marks every 6" along the tubing make cutting tolength easier (PTW-01FP only)• Speeds installation of sprinklers by allowing for fastconnections and easy setting to grade• Acts as flexible swing joint, protecting sprinklers andlaterals from impact damageSpecifications• Maximum working pressure: 100 psi at 110° F• Wall thickness: .105" (2.7mm)• Diameter: ID: .490" (12.4mm), OD: .700" (17.8mm)• Maximum flow: 8 GPM• Burst pressure: 350 psi minimumPOLYETHYLENETUBINGLOW DENSITY, UV RESISTANTMICRO-TUBING34<strong>Netafim</strong> <strong>USA</strong>


ACCESSORIESINSTALLATION TOOLSGAUGE 30 GAUGE 100MTUBESPUNSteel punch for 5mmMicro FittingsMTUBEPPUNPlastic Punch for 5mmMicro FittingsWBTDWheelbarrow Tubing DispenserTDSWall Mounted StationaryTubing DispenserMICRO-TUBE FITTINGSEDTUBETEEEDTUBEBAMPT = Male Pipe ThreadEDTUBESTKGOOFPLUGEDTUBE8XMT35<strong>Netafim</strong> <strong>USA</strong>


5470 East Home AvenueFresno, CA 93727phone 888.638.2346fax 800.695.4753visit our web site atwww.netafimusa.com1003-8/04-ries-40m

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!