You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ONE LINE DOES IT ALLWhether you’re working on steel, SMC, FRP,fiberglass, rigid plastic, semi-rigid plastic, flexibleplastic or panel bonding, <strong>Norton</strong> <strong>SpeedGrip</strong> Acrylic,Urethane and Epoxy Adhesives get the job done.Put <strong>Norton</strong> <strong>SpeedGrip</strong>to the test
<strong>SpeedGrip</strong> applicationsMetal bondingComposite Plastic rePAir – bondingACRYLIC ADHESIVESComposite Plastic RePAir – StructuralComposite Plastic RePAir – cosmeticFlexible Plastic RePAir – Structural636425- DESCRIPTION COLOR Work TimeFlexible Plastic RePAir – Cosmetic■ 06419 Metal Door Skin Bonding Green 45 min 1-1/2 hrs■ 06420 Metal Panel/Weld Bonding Gray 75 min 2-1/2 hrsEPOXY ADHESIVESHandling/Clamp Time Sanding Time Paint Time■ ■ ■ ■ 06421 Multi-Bonder Black 90 min 4 hours 8 hours■ ■ 06400 Plastic Repair Skim-Plus Blue 1 – 2 min 15 – 20 min* 60 min■ ■ 06412 Repair and Filler Purple 5 min 15-30 min* 15-30 min*■ ■ 06417 SMC/Fiberglass Repair Beige 40 min 10 min @180°F 60 min @180°FURETHANE ADHESIVES■ ■ ■ 97122 45 second (50 ml) Opaque 45 sec 2-1/2 min 5 – 7 min*■ ■ ■ 04647 45 second Opaque 45 sec 2-1/2 min 5 – 7 min*■ ■ ■ 04615 1 minute Black 1-1/2 min 7 min 12 – 20 min* 1 hour■ ■ ■ 04616 5 minute Black 7 min 15 min 45 min 2 hours■ ■ ■ ■ 04617 15 minute Black 20 min 45 min 90 min 3 hours*Sanding time depends on film thickness I Times are @ 70°F/21°C except #06421 @ 77°F / 25°C I All are 220 ml except #97122
acrylic for metal bonding2,500 PSI Lap shear strength makes acrylic adhesives one of the strongest available. It remains flexible and performs well at extremely lowtemperatures. Acrylic is the best choice for metal-to-metal bonding. For optimal results, grind the panel to bare metal.GUARANTEED: <strong>Norton</strong> <strong>SpeedGrip</strong> acrylic adhesives provide a lifetime corrosion and performance warrantyPRODUCTIVE: Reduce repair time versus welding, seals and bonds in one application and de-clamp in as little as 90 minutesPRECISE CONTROL:Glass bead technology allows for correct panel spacing and perfect bond controlVERSATILE: Bonds a variety of substrates: automotive grade cold-rolled steel, galvanized steel, e-coat, aluminum and stainless steel withminimal surface preparationUPC 636425- Work Time Clamp Time Cure Time06419 45 minutes 1-1/2 hours 8 hours06420 75 minutes 2-1/2 hours 8 hoursTimes will increase as temperature decreases.Times shown above are at 70°F/21°C.<strong>SpeedGrip</strong> adhesives SHOULD NOT be used for bonding structural componentssuch as rails, pillars, rocker panels, core supports, etc. If in doubt as to what isa structural component, contact the vehicle manufacturer.RESISTANCE SPOT WELDING: <strong>Norton</strong> recommends resistance welding throughMetal Bonding Adhesives in a wet or cured state with no burn back.MIG WELDING: <strong>Norton</strong> Adhesive CANNOT be in the weld area or burn back will occur.<strong>Norton</strong> recommends at least one inch clearance from the weld site. A one inchclearance will keep the adhesive from contaminating the weld site while positioning thepanel on the vehicle. If using weld through primer, make sure to cover weld area onvehicle and replacement panel, but do not contaminate bond line areas.Scan this QR code withyour smartphone to viewa step-by-step video formetal bonding.Tech TIPAfter clamping, wipe any excess adhesive offthe panel while wet.Metal Door Skin Bonding Adhesive#636425-06419Two-part acrylic (2:1) for panel bonding of door panels,other body sheet metal, steel and aluminum.• Bonds door panels to door frames without welding• Work time 45 minutes• Clamp time 1-1/2 hours• Guaranteed corrosion protectionMetal Panel/Weld Bonding Adhesive#636425-06420Two-part acrylic (2:1) for panel bonding and weld bondingof quarter panels, rear body panels, roof panels, doorpanels, van side panels and outer truck bed panels on baremetals, including aluminum.• Long work time 75 minutes for bonding large areas• Guaranteed corrosion protection• Perfect for high temperaturesMeets Ford WSS-M2G410-A2 andGM6449G Metal Bonding SpecificationsMeets Chrysler MS-CD507Metal Bonding SpecificationApplications:Bonding of patch panels and trailer side wall sections, etc.Bonding of exterior body panels including door panels, quarter panels, roofpanels, etc.Can be used to weld and/or rivet bond structural or non-structural body panels.Follow OEM procedures.Applications:Bonding of exterior body panels including door panels, quarter panels, roofpanels, etc., when an extended working time is needed.Can be used to weld and/or rivet bond structural or non-structural body panels.Follow OEM procedures.
urethane for plastic repair [CONT.]<strong>SpeedGrip</strong> 5 minutes#636425-04616Two-part urethane (1:1) adhesive used for structural andcosmetic repairs of all plastic bumpers, bumper tabs,emblems, door trims, interior and exterior plastic repairsand cosmetic repairs including TPE, TPO, TEO, PP and ABSand can also be used to bond SMC or fiberglass panels.• One product for all structural and cosmeticrepairs on bumpers• Easy to sand to a feather edge• Good for elevated temperatures• Will not lift or roll up• Accelerate cure with heat (3 min @ 140°F)<strong>SpeedGrip</strong> 15 minutes#636425-04617Two-part urethane (1:1) adhesive used for installation ofhood panels, roof panels, fenders, fender liners, fairings,spoilers, wind deflectors, cab extenders, ground effects,headlamp buckets and other body panels. For bondingfiberglass, SMC, carbon fiber and other plastics to itselfand to primed metal.• One product for all structural and cosmeticrepairs on bumpers• Work window allows for larger repairs• Perfect for elevated temperatures• Easy to sand to a feather edge• Accelerate cure with heat (10 min @ 140°F)Applications:Repairs bumper tabs, trim, and small plastic parts. Bonds plastic parts toplastic and coated metals.Repairs tears and holes on bumpers, trim, moldings, etc.Applications:Bonds composite materials to itself or to coated metals.Adhesion promoterUPC 636425- DESCRIPTION SIZE04624 Brush Top 118 ml04625 Aerosol 333 gramsEPOXY for bondingUPC 636425- Work Time Clamp Time Sanding Time Paint / cure Time06421 90 minutes 4 hours 8 hours 24 hoursAdhesion Promoter<strong>SpeedGrip</strong> Adhesion Promoter is available in both aerosoland brush top. No need to identify plastic type – justsimply apply to all plastics once, no need to re-apply.Allow for a 10 minute flash time.Applications:No plastic identification required.Use with urethane adhesives on plastic parts.For use on outer body panels only. Not for use on structural components such aspillars, frame rails, core supports, or rocker panels (on unibody vehicles).Times will increase as temperatures decrease. Times shown above are at 77°F/25°C.Full cure time is 24 hours, but this may be accelerated with heat.RESISTANCE SPOT WELDING: <strong>Norton</strong> recommends resistance welding throughMulti-Bonding Adhesives in a wet state only with little to no burn back.MIG WELDING: Multi-Bonding Adhesive CANNOT be in the weld area or burn backwill occur. <strong>Norton</strong> recommends at least one inch clearance from the weld site. A oneinch clearance will keep the adhesive from contaminating the weld site whilepositioning the panel on the vehicle. If using weld through primer, make sure to coverweld area on vehicle and replacement panel, but do not contaminate bond line areas.Structural VideoScan these QR codeswith your smartphoneto view a step-by-stepvideo for structural andcosmetic plasic repair.Cosmetic VideoEpoxy Multi-Bonding Adhesive#636425-06421Two-part epoxy adhesive designed to bond SMC, FRP,fiberglass, steel and aluminum auto parts and body panelsto each other and to metal frames(no primer required).• Minimal odor• Glass beads for proper spacing• Easy to sand formulation• Paintable• Seals and bonds in one step
epoxy for SMC/Plastic RepairEpoxy adhesives work well at both high and low temperatures, have shear strength of 3,000 PSI and perform well filling gaps. Ideal forundetectable SMC repairs, plus they can be used with most other collision repair applications.UPC 636425- Work Time Clamp Time Sanding Time Paint Time cure Time06400 1-2 minutes – 15-20 minutes 60 minutes 60 minutes06412 5 minutes – 15-30 minutes 15-30 minutes 6-8 hours06417 40 minutes 3 hours (10 min @ 180°F) 10 minutes @ 180°F 60 minutes @ 180°F 60 minutes @ 180°FTimes will increase as temperatures decrease.Times shown above are at 70°F/21°C unless noted otherwise.Plastic RepairSkim-Plus#636425-06400Two-part epoxy (1:1) used torepair most plastic parts,including bumper covers andother plastic body panelsincluding PP, fiberglass,Metton®, Telene®, SMC, TEOand urethane. Formulated tofinish the front side of flexiblerepairs or used over the top ofurethane adhesives.• Incredibly easy to sandin 20 minutes or less• No plasticidentification required• No AdhesionPromoter needed• Mix with either a spreader#06396 or mix tipRepairand Filler#636425-06412Two-part epoxy (1:1) used forcosmetic repairs on both flexibleand rigid parts. AdhesionPromoter must be used onplastic parts. Work time is 5minutes and it can sanded in15-30 minutes. It sands easilyand feathers well.• Incredibly easy to sandin 30 minutes or less• Use adhesion promoter onplastic parts• Feathers wellSMC/FiberglassRepair Adhesive#636425-06417Two-part epoxy (1:1) used forstructural and cosmetic repair ofall types of rigid body plasticssuch as SMC, GTX, fiberglass,Metton® and carbon fiber.• One product for all rigidbody panels• Sands very easily• Will not lift or roll up• No read-through andzero shrinkageFord: SMC panel repairGM: SMC panel repair<strong>SpeedGrip</strong> seam sealersSeam Sealer#636425-97120Two-part epoxy (1:1) used to seal interior and exterior seams,joints and voids. It will not shrink, harden or crack and retainsits flexibility. For use on vertical or horizontal seams.Bare Metal Epoxy Seam Sealer#636425-06398Two-part epoxy (1:1), non-sag, high solid epoxy designedwhere a fast setting and fast paint time sealer is desired.Provides the latest in technology for sealing seams and fasterpaint time than the traditional sealers. <strong>Norton</strong> Bare Metal EpoxySeam Sealer extrudes easily with excellent toolingcharacteristics with no shrinkage.PAINTABLE IN45 MINSeam Sealer-Self Leveling#636425-97121Two-part epoxy (1:1) is formulated for use on drip rails, trunkseams and roof channels. It will not shrink, harden or crack andretains its flexibility. For use on horizontal seams.PAINTABLE IN30 MINUPC 636425- Work Time Sanding / Paint Time Full Cure97120 8 – 10 minutes 30 minutes 2 hours97121 5 – 10 minutes 30 minutes 2 hours06398 5 – 10 minutes 45 minutes 6 - 8 hoursTimes will increase as temperatures decrease. Times shown above are at 70°F/21°C.Sprayable Seam Sealer S-4 Kit#636425-06403 (Kit)#636425-06404 (Tips)The S-4 (Sprayable Seam Sealer System) Starter Kitincludes one S-4 Atomization Unit with a standardM style air fitting (which can be changed out), a bagof six S-4 Mixing Tips and instructions for use.The S-4 Atomization Unit attaches to the bottom of the Pneumatic Applicator Gun(#41399) and can easily adjust the air pressure as needed. Either Seam Sealer #97120or Bare Metal Seam Sealer #06398 can be used with this system to replicate texturedOEM seals. The unique S-4 Mixing Tip (#06404) screws onto the cartridge, and theopposite end of the tip attaches to the hose on the S-4 Unit.Because of the unique design of the S-4 Mixing Tip, this system also helps increaseefficiency as there is virtually no clean-up. Simply replace the tip for the next job andfollow the same instructions. Additional tips are also sold separately from the starter kit.
<strong>SpeedGrip</strong> AvailabilitiyUPC636425-Quantitypkg/case description size colorOpentimeWorktimeHandling/Clamp timesandingtimePainttime Cure time OEM approvalsACRYLIC ADHESIVES06419 1 / 6 Metal Door Skin Bonding 220ml 2:1 Green 45 min 1½ hrs 8 hours Ford: WSS-M2G410-A2GM: 6449G06420 1 / 6 Metal Panel/Weld Bonding 220ml 2:1 Gray 75 min 2½ hrs 8 hours Chrysler: MS-CD507URETHANE ADHESIVES97122 1 / 12 Adhesive 45 second 50 ml 1:1 Opaque 30 sec 45 sec 2½ min 5–7 min* 24 hours04647 1 / 6 Adhesive 45 second 220 ml 1:1 Opaque 30 sec 45 sec 2½ min 5–7 min* 24 hours04615 1 / 6 Adhesive 1 minute 220 ml 1:1 Black 1 min 1½ min 7 min 12–20 min* 1 hour 24 hours04616 1 / 6 Structural Adhesive 220 ml 1:1 Black 5 min 7 min 15 min 45 min 2 hours 24 hours5 minute04617 1 / 6 Structural Adhesive 220 ml 1:1 Black 15 min 20 min 45 min 90 min 3 hours 24 hours15 minute04624 1 / 12 Adhesion Promoter Brush Top 118 ml04625 1 / 12 Adhesion Promoter - Aerosol 333 gramsEPOXY ADHESIVES06400 1 / 6 Plastic Repair Skim-Plus 220 ml 1:1 Blue 1–2 min 15–20 min* 60 min 60 min06412 1 / 6 Repair and Filler 220 ml 1:1 Purple 5 min 15–30 min* 15–30 min 6-8 hours06417 1 / 6 SMC/Fiberglass Repair 220 ml 1:1 Beige 40 min 10 min@ 180°F60 min@ 180°F60 min @180°F24 hrs @70°F06421 1 / 6 Multi-Bonder 220 ml 2:1 Black 90 min 4 hours 8 hours 24 hoursEPOXY SEAM SEALERS97120 1 / 6 Seam Sealer 220 ml 1:1 Black 8–10 min 30 min 30 min 2 hours97121 1 / 6 Seam Sealer Self-Leveling 220 ml 1:1 Black 5–10 min 30 min 30 min 2 hours06398 1 / 6 Bare Metal Seam Sealer 220 ml 1:1 Gray 10-15 min 45 min 6-8 hoursFOAMS04622 1 / 4 Flexible Urethane Foam 220 ml 1:1 Gray 3–5 sec 15 min 15 min06399 1 / 4 Rigid Urethane Foam 220 ml 1:1 Yellow 10–25 sec 15 min 45 minACCESSORIES41399 1 / 1 Pneumatic Gun 1:1 and 2:141400 1 / 1 Manual Gun 1:1 and 2:197117 1 / 1 Gun for 50 ml 1:197118 6 / 72 Mixing Tips 16 element For 50 ml White04628 6 / 60 Mixing Tips 24 element For 220 ml Green04632 1 / 6 Nylon Reinforcing Tape 2" x 65'06396 25 / 100 Spreader for Skim-Plus 3" x 4" Black06397 1 / 6 Fiberglass Cloth 4" x 12'06403 1 / 1 S-4 Starter Kit06404 6 / 60 S-4 Mixing Tips* Sanding time depends on film thicknessTimes are @ 70°F/21°C except #06421 @ 77°F / 25°CFord: SMC panel repairGM: SMC panel repairfor technical help:1 866 879-3761
<strong>SpeedGrip</strong> foamFlexible Urethane Foam#636425-04622Two-part gray, flexible urethane foam formulated toexpand up to 10 times its original volume. Used to stopwind, noise and water leaks in pillar posts. Matches OEMflexible foams.• Expands up to 10 times its original volume• Eliminates wind noise• Matches OEM flexible foams• Sound deadening and vibration dampeningRigid Urethane Foam#636425-06399Two-part yellow, non-structural rigid foam usedfor sound deadening, vibration dampening, reinforcement,sealing and filling of: pillars, rocker panels, fender rails,quarter panels and floors. Matches OEM sound deadeningfoams commonly found in front rails, pillars, rearsupports and rockers.• Expands up to 10 times its original volume• Matches OEM sound deadening foams• Vibration dampening<strong>SpeedGrip</strong> accessoriesManual GunNylon Reinforcing Tape#636425-04632Self-adhesive backing tape for repairingand filling holes and plastic gouges. Itcan be used for both urethane and epoxyadhesives. Size: 2" x 65'.Pneumatic GunManual Gun for 50 ml 1:1Applicator GunsThese applicator guns are designed for use with <strong>SpeedGrip</strong> Adhesives.UPC 636425- Description41400 Manual Gun For either 200 ml or 220 ml41399 Pneumatic Guncartridges 1:1 or 2:197117 Manual Gun For 50 ml 1:1Mixing TipsMixing tips ensure automatic mixing foroptimal performance.Fiberglass Cloth#636425-06397Fiberglass cloth designed to provideadditional strength to the repair. Helpeliminate "bull's eye" in SMC repairs.Size: 4" x 12'.Mixing Spreader withTapered Edges#636425-06396For use with #06400 Plastic RepairSkim-Plus. 3" x 4".UPC 636425- Description Mixing Tip color04628 All 220 ml 24 elements Green97118 All 50 ml 16 elements WhiteBetter Value. Better Price. Better Performance.www.facebook.com/nortonautomotive | www.youtube.com/nortonauto | www.nortonautomotive.comSaint-Gobain Abrasives, Inc.USA Toll Free: 1 800 456-8444Canada Toll Free: 1 800 263-6565Form #<strong>7663</strong> REV 08/13© Saint-Gobain Abrasives, Inc. August 2013The <strong>Norton</strong> logo is a registered trademark and <strong>SpeedGrip</strong> is a trademark of Saint-Gobain Abrasives, Inc.Metton is a registered trademark of Metton America Inc., and Telene is a registered trademark of Telene SAS.
Change language