DRIVE CHAINS - Tsubaki

Standard Roller Chains RS Roller ChainRS11-SS-1Before Use For Safe UseStandard Roller Chains Lube-Free Roller Chains Heavy Duty Roller Chains Corrosion Resistant Roller Chains Specialty Roller Chains Accessories Selection HandlingTSUBAKIChain Number3.345 2.2750.383.5RS11-SS-1 780{80} 50{5} 52 134Standard Roller ChainsRS11SS SprocketSprocket NumberTypeChain numberAverageTensile StrengthN{kf}Stainless steelNumber of teeth1.57MaximumAllowable LoadN{kf}Note: 1. Made of SUS 304 stainless steel. 2. No offset links available.3. Bushed chain.3.7465 3.7465Non-stepped teeth1B typeNumber ofteethTypeApproximateMass/mPitch circulardiameter(DP )Stepped teethSprocket outerdiameter(DO)2.285Non-stepped teeth 1C type12 14.475 16.26 9.415 18.020 19.9 9 13416 B or C 19.204 21.1 9 14M30.518 (non-stepped 21.575 23.5 11 1620teeth)23.949 25.924 28.703 30.7 6 13 19 M40.728 33.462 35.530 35.842 37.934 B or C 40.604 42.736 (stepped 42.986 45.1 6 13 19 M40.740 teeth) 47.751 49.848 57.283 59.40.381.83Drawing Scale 2/1Number ofLinks Per UnitBore diameter (d )Min.Max.Hub Set screwdiameter hole(DH )Stepped teethApprox. weight ()1B type 1C type5.9 7.411.5 14.713.5 17.317.7 22.823.3 30.325.7 32.728.7 35.729.7 39.337.9 48.940.7 52.446.5 59.960.5 77.8MaterialStainlesssteelStainlesssteelNote: 1. Bore diameter is customizable within the above ranges. However, the finishing hole tolerance is H8 fordiameters of less than 8 and H7 for diameters of 8 and above.2. Unless bore diameter is specified, sprockets are made to the above minimum size with an H10 tolerance.23