DRIVE CHAINS - Tsubaki

Ordering RS Roller ChainT S U B A K I D R I V E C H A I NBefore Use For Safe UseStandard Roller Chains Lube-Free Roller Chains Heavy Duty Roller Chains Corrosion Resistant Roller Chains Specialty Roller Chains Accessories Selection Handling3. Ordering an odd number of linksBe sure to indicate "configuration specification". If no specification is made for an oddnumber of links, both end links will be inner links (both RL) as in [4].1 9 links (including CL and OL)2 9 links (specified to include 2POL)3 9 links (both ends with CL)4 9 links (both ends inner links)5 9 links (both ends outer links)After installing the equipment, use a riveting punch (see theaccessories section) to fasten the pin ends of the rivets inthe outer links on both ends.Product codeA110018 RS50-1-RP 7A115018 RS50-1-CL 1A116013 RS50-1-OL 1Configuration specificationProduct codeA110018 RS50-1-RP 5A115018 RS50-1-CL 2A116080 RS50-1-2POL 1Configuration specification9LX1H CL,OLLKK9LX1H2POL,CLNote: To specify that parts be installed, an assembly specificationsuch as CL - OL (2POL) is required.Product codeChainnumberCountA110018 RS50-1-RP 7A115018 RS50-1-CL 2Configuration specificationProduct codeChainnumberChainnumberCountCountUnits9LX1H CL-CLNote: To specify that parts be installed, an assembly specificationsuch as CL - OL (2POL) is required.A110018 RS50-1-RP 9 LConfiguration specificationProduct codeChainnumberChainnumberCountLKKUnitsUnitsLKUnits9LX1HRL-RLCountUnitsA110018 RS50-1-RP 9 LConfiguration specificationNote: To specify that parts be installed, an assembly specificationsuch as CL - OL (2POL) is required.9LX1HPL-PLThe photograph in each example order shows CL and OL assembled. In an actual order, CL and OL aredelivered unassembled. If you wish parts to be assembled, a configuration specification is necessary.17