DRIVE CHAINS - Tsubaki

Specialty Roller ChainsLeaf ChainsClevisesConnecting links, end links, outer links, and inner links can all be used for Leaf Chain end links. When connecting endlinks (outer link, inner link), use the types of clevises shown below. Consult Tsubaki with special requests.Connecting Leaf Chain to a clevis1. Connecting the chain end to a (1) connecting link,(2) end link, or (3) outer link.Connect an outer-link clevis to the connecting link,end link, or outer link.Outer-link clevisWAL422AL444AL466AL522AL544AL566AL622AL644AL666AL822AL844AL866AL1022AL1044AL1066AL1222AL1244AL1266Ud+0.0504.02+0.0505.13+0.0506.00+0.107.97+0.109.57+0.1011.14(1) Connecting linkr111der U+0.2 +0.1 0 +0.1r U+0.2BL Leaf00-0.2 00d(max.) (min.) e 1 2Chain Number(max.) (min.) e6.3 6.07.9 7.29.5 9.012.7 11.515.8 14.519.0 17.5Outer-link clevisClevis size and materialAL LeafChain NumberInner-link clevisAL TypeGreater thanplate thickness (T )3.1 9.8 3.4 9.5 3.416.2 15.9 3.44.1 12.9 4.4 12.6 4.421.3 21.0 4.44.8 15.0 5.1 14.7 5.124.8 24.5 5.16.4 20.3 6.9 19.8 6.933.7 33.2 6.98.0 25.1 8.5 24.6 8.541.7 41.2 8.59.6 29.9 10.1 29.4 10.149.7 49.2 10.1AL1444 +0.135.1 34.5 11.9022.2 20.0 11.9AL1466 12.7458.3 57.7 11.9AL1644 +0.139.9 39.2 13.5025.4 23.0 13.5AL1666 14.3266.3 65.6 13.5Ur(2) End linkEnd pinslip fitOuter-link clevis2 2dS2. Connecting the chain end to an (4) inner link.Connect an inner-link clevis to the end pin.The end pin length varies according to the external width(W) of the clevis. When ordering, specify the W dimension.Outer-link clevisWUr(3) Outer linkRivet after assembly11de+0.10 10-0.2+0.10 2BL423 6.5 6.2 +0.050BL4346.3 6.3 10.7 4.4 10.4 2.35.13BL44617.1 6.5 16.8 4.4BL523 7.6 7.3 +0.050BL5347.9 7.9 12.5 5.1 12.2 2.66.00BL54619.9 7.6 19.6 5.1BL623 10.3 9.8 +0.10BL6349.5 9.5 17.0 6.9 16.5 3.67.97BL64627.0 10.3 26.5 6.9BL823 12.7 12.2 +0.10BL83412.7 12.7 21.0 8.5 20.5 4.49.57BL84633.4 12.7 32.9 8.5BL1023 15.1 14.6 +0.10BL103415.8 15.8 25.0 10.1 24.5 5.211.14BL104639.8 15.1 39.3 10.1BL1223 17.7 17.1 +0.10BL1234 19.0 19.0 29.3 11.9 28.7 6.112.74BL1246 46.7 17.7 46.1 11.9BL1423 20.1 19.4 +0.10BL1434 22.2 22.2 33.3 13.5 32.6 6.914.32BL1446 53.1 20.1 52.4 13.5BL1623 23.1 22.1 +0.150BL163425.4 25.4 38.2 15.6 37.2 8.017.49BL164660.9 23.1 59.9 15.6UEnd pinslip fitr(4) Inner linkInner-link clevisTsubaki will make end pins to your specification.Inner-link clevisBL TypeGreater thanplate thickness (T )Outer-link clevis2dSBefore Use For Safe Use Standard Roller Chains Lube-Free Roller Chains Heavy Duty Roller Chains Corrosion Resistant Roller Chains Specialty Roller Chains Accessories Selection HandlingUse heat-treated alloy steel (SCM435, etc.) in order to obtain a hardness of HRC40 to 45.For clevises with screws, however, the hardness must be HRC30 to 35 in order to reduce any hazard due to delayed fractures.116