DRIVE CHAINS - Tsubaki

Corrosion Resistant Roller Chains Stainless Steel Drive ChainsSS SpecificationL 1L 2L 1L 2TChThDDPPSingle strandPDouble strandPRHRHTWTWLRS25-SS-1RS25-SS-1 uses 2-pitch OL.Roller Inner Width of PlatesPinsTransverse Maximum Approximate LinksTSUBAKI PitchDiameter Inner LinkPitch Allowable Load Mass PerChain Number PR WThickness Height Height DiameterOffset PinL1L2 L1 L 2C kN{kf} k/m UnitT H h DLength LRS11-SS-1 3.7465 2.285 1.83 0.38 3.5 3.5 1.57 5.44 2.275 3.165 0.05 {5} 0.052 134RS25-SS-1 6.35 3.30 3.18 0.75 5.84 5.05 2.31 8.6 3.8 4.8 0.12 {12} 0.14 160RS35-SS-1 9.525 5.08 4.78 1.25 9.0 7.8 3.59 12.7 6.05 6.65 14.7 0.26 {27} 0.33 320RS40-SS-117.9 8.05 9.85 18.6 0.44 {45} 0.6412.70 7.92 7.95 1.5 12.0 10.4 3.97240RS40-SS-2 32.6 15.25 17.35 33.5 14.4 0.88 {90} 1.27RS50-SS-122.3 10.1 12.2 23.9 0.69 {70} 1.0415.875 10.16 9.53 2.0 15.0 13.0 5.09192RS50-SS-2 40.4 19.15 21.25 41.8 18.1 1.37 {140} 2.07RS60-SS-127.6 12.65 14.95 29.4 1.03 {105} 1.5319.05 11.91 12.70 2.4 18.1 15.6 5.96160RS60-SS-2 50.4 24.05 26.35 52.6 22.8 2.06 {210} 3.04RS80-SS-135.7 16.25 19.45 39.0 1.77 {180} 2.6625.40 15.88 15.88 3.2 24.1 20.8 7.94120RS80-SS-2 64.8 30.90 33.90 68.05 29.3 3.53 {360} 5.30RS100-SS-142.6 19.75 22.85 45.7 2.55 {260} 4.0131.75 19.05 19.05 4.0 30.1 26.0 9.54RS100-SS-2 78.5 37.70 40.80 81.6 35.8 5.10 {520} 7.99RS120-SS-155.55 25.75 29.80 59.7 3.82 {390} 6.1338.10 22.23 25.40 5.0 36.2 31.2 11.11RS120-SS-2 100.6 48.35 52.25 104.9 45.4 7.65 {780} 12.22RS140-SS-161.1 28.15 32.95 66.2 4.61 {470} 7.9144.45 25.40 25.40 6.0 42.2 36.4 12.71RS140-SS-2 110.0 52.70 57.30 114.6 48.9 9.22 {940} 15.77RS160-SS-17.072.1 33.55 38.55 77.3 6.37 {650} 10.8650.80 28.58 31.75 48.2 41.6 14.29RS160-SS-2 6.4127.2 66.05 61.15 132.2 58.5 12.7 {1300} 21.66L 1L 1Connecting linkRS11-SS-1 to RS60-SS-1: Clip-typeRS80-SS-1 to RS240-SS-1: Cotter pin-type11SS to 25SS: Dual riveting( 35SS to 60SS: Button-head riveting )(Dual riveting)Pre-delivery lubrication is not carried out on SS Specification Stainless Steel RollerChain. If these chains are to be used in environments where they are not submergedin or come in contact with water, pre-use lubrication of the chain must take place. Ifchains are used in these conditions without lubrication, poor articulation of the chainmay occur at a much earlier stage than expected.The maximum allowable load is calculated when chain is lubricated (including waterlubricant).*RS11-SS-1 chain is lubricated.96806860Before Use For Safe Use Standard Roller Chains Lube-Free Roller Chains Heavy Duty Roller Chains Corrosion Resistant Roller Chains Specialty Roller Chains Accessories Selection HandlingRS180-SS-1 57.15 35.71 35.72 7.15 52.3 43.4 17.46 78.5 36.05 42.45 84.9 8.55 {872} 13.45 54RS200-SS-1 63.50 39.68 38.10 8.0 60.3 52.0 19.85 84.8 39.5 45.3 90.8 10.8 {1100} 16.54 48RS240-SS-1 76.20 47.63 47.63 10.0 72.4 62.4 23.81 105.5 49.0 56.5 113.2 15.7 {1600} 24.50 40Note: 1. Chains marked with an are rollerless - - bush diameter given.2. Multi-strand stainless steel chains and sprockets are made-to-order. Be aware that chain sizes greater than RS120-SS-1 have a different plate thickness than RS Roller Chains.102