CEMB C72 Parts List

More documents

Recommendations

Info

6.3 - AUTOMATIC GAUGES6.3.1 - RIM DISTANCE GAUGE- Shift the distance gauge to position , keeping it quite still,press- Move the gauge to position , pressCORRECT CALIBRATION- Return the gauge to rest position- The wheel balancer is ready for operationN.B.: In the event of errors or faulty operation, the writing appears on the display : shiftthe gauge to position and repeat the calibration operation exactly as described above. If theerror persists, contact the Technical Service Department. In the event of incorrect input in the rimdistance gauge calibration function, pressto cancel it.6.3.2 - DIAMETER GAUGE- Currently preset diameter.- Set the diameter with which to calibrate the machine (10÷18”)with- Press- Move the gauge tip into measuring position (Fig. 8/Pos.A) andkeeping it still, pressCORRECT CALIBRATION- Return the gauge to rest position- The wheel balancer is ready for operationIn the event of incorrect input in the rim distance gauge calibration function, pressto cancel it.I 0226 GB - 24
6.3.3 - WIDTH GAUGE (OPTIONAL)Set withthe distance in mm between theSONAR sensor and the distance gauge clamp in pos. 0.-0In the event of incorrect input in the width gauge calibration function, press .6.5 AMBIENT TEMPERATUREWhen automatic width measurement or eccentricity measurement are enabled, the ambient temperaturemust be set to ensure correct calibration of the sonar sensors.Set the average ambient temperature for thelocation of the balancing machine.CONFIRMI 0226 GB - 25
Page 1 and 2: Instructions for useIContentsPage1
Page 3 and 4: 1- GENERAL1.1 - GENERAL SAFETY RECO
Page 5 and 6: 3 - COMMISSIONING3.1 - ANCHORINGThe
Page 7 and 8: SE2-Dismounting360°abcdConee- Qua-
Page 9 and 10: 4.3 - AUTOMATIC DISTANCE AND DIAMET
Page 11 and 12: OPERATION FUNCTIONS MENUEccentricit
Page 13 and 14: 5.2.1.1 - “AUTOMATIC WIDTH” OPT
Page 15 and 16: 5.3 - RECALCULATION OF THE UNBALANC
Page 17 and 18: RESULTS UNBALANCE MEASUREMENTFig. 1
Page 19 and 20: 5.4.4 - ALU AND STATIC MODESFrom th
Page 21 and 22: 6.1 - SELF-DIAGNOSTICS6 - SET UPDIS
Page 23: 6.3 SCREEN SAVERIt is possible to e
Page 27 and 28: 10 - RECOMMENDED SPARE PARTS LIST(F
Page 29 and 30: 111923 10456737811108111Guarnizione
Page 31 and 32: C 72 (A) - C 72SE (B)E-0226-C72-GB.
Page 33 and 34: D0112-111 2 3 4 5 6 7 68 9 6 7 10 1
Page 35 and 36: D0140-1.1-BP1.1-BPONLY BN. CODE DAT
Page 37 and 38: D0112-33123 4121110945687N. CODE DA
Page 39 and 40: D0186-44171511716152431413111256879
Page 41 and 42: D0186-6611B25 2624231211A105 6 7222
Page 43: D0186-8-428-42N. CODE DATA N. CODE
Page 46 and 47: M 0226 - 2 GB
Page 48 and 49: 3.2 - CALIBRATION OF THE DISTANCE P
Page 50 and 51: 5 - TROUBLE SHOOTING SEQUENCETests
Page 52 and 53: 6 - POWER SUPPLY LAYOUT DIAGRAMFig.
Page 54 and 55: 8 - TO CHECK MACHINE CALIBRATION1)
Page 56: M 0226 - 12 GB

CEMB C72 Parts List

Create successful ePaper yourself

Delete template?

Save as template?