CEMB C72 Parts List

6.2 - SELF-CALIBRATIONFor machine self-calibration proceed as follows:- Fit a medium-sized metal wheel on the shaft. Example: 6” x 14” (± 1”)- Preset the exact dimensions of the wheel mounted.CAUTION!!Presetting of incorrect dimensions would mean that the machine is not correctlycalibrated, therefore all subsequent measurements will be incorrect until a new selfcalibrationis performed with the correct dimensions!- Perform a spin under normal conditions.- Add 100 g (3.5 oz) on the outside in any angular position.- Shift the 100 g. weight from the outside to the inside keepingthe same angular position.- Shift the 100 g. weight to the 12 o’clock position.END OF SELF-CALIBRATIONCANCELS SELF-CALIBRATION IN ANY PHASEI 0226 GB - 22