CEMB C72 Parts List

Fig. 15Positionreachedon theexternal side- Bring the wheel into correct angular position.- Move the gauge until the display corresponding to the selected correction plane shows the unbalancevalue again.- Rotate the rim until the correct weight lies against the rim.- The fact that the weight application position is no longer vertical (fi g. 16) is offset automatically.N.B. : It is not possible to put automatically the correction weight in the Fig.8/Pos.B position; alwaysrotate the rim in Fig.5/Pos.AFig. 165.4.2 - RESOLUTION OF THE UNBALANCE (SPLIT)SPLIT only has meaning in the case of static unbalance or ALU-S on outside. It serves for hiding anystick-on unbalance correction weights behind the rim spokes.PRESETTING:Perform a balancing spin ( )Fig. 17- Place any spoke in the 12 o’clock position- set the number of spokes- / confi rm the settings enabling unbalancesplitI 0226 GB - 16