COUPLINGS

• Installing the Shaft on the CouplingA variety of methods are available for mounting on ashaft such as the friction lock compatible with a largediameter, a high-precision friction lock, a taper shaftcompatiblemethod, and others. The pilot bore itemhas also been standardized, enabling designs freelyby customers such as the key/set screw method,shrink fit-compatible method, and others.High-Precision Friction Lock Type +High-Precision Friction Lock TypeSFS-£S-£M-£MHigh-Precision Friction LockType + Taper Shaft TypeSFS-£S-£M-£CPilot Bore TypeBore processing can be performed freely becausethe product is provided only with a drilled hole.Key/Set Screw TypeThis is a finished product using keyway processing,bore processing, and set screw processingbased on Miki Pulley’s standard bore processingspecifications. The parts can be assembledimmediately after delivery to the customer.Target model: SFS-£S, SFS-£W, SFS-£G* Indicate the nominal bore diameter (blank, H, N)after the model.E.g.) SFS-£S-£H-£NHigh-Precision Friction Lock TypeA double-taper lock part is allocated to the coupling,so high-precision installation is achieved by highlocking force and rigidity with the shaft.Target model: SFS-£S, SFS-£W, SFS-£G* Indicate the nominal bore diameter (M) after themodel.E.g.) SFS-£S-£M-£MSERVO FLEXSFSLarge-Diameter Shaft-Supporting Friction Lock Type +Large-Diameter Shaft-Supporting Friction Lock TypeSFS-£SS-£K-£KTaper Shaft TypeDirect installation on the servo motor taper shaft isachieved.Target model: SFS-£S, SFS-£W, SFS-£G* Indicate the nominal bore diameter (C) after themodel.E.g.) SFS-£S-£M-£CLarge Diameter-Supporting Friction Lock TypeLocking force is high as a result of the single-taperlock method. Shafts larger than the size of thecoupling are also compatible.Target model: SFS-£SS, SFS-£DS* Indicate the nominal bore diameter (K) after themodel.E.g.) SFS-£SS-£K-£KSFS MODELCOUPLING_E_22_41new.indd 25Atención al Cliente - 902 208 608259/15/10 4:23 PM