Paint Shop Pro X User Guide - FTP - Corel Corporation

3 On the Tool Options palette, choose from the following options:• Auto — automatically straightens the image based on the position of thestraightening bar (recommended)• Make vertical — rotates the image to make the straightening bar vertical• Make horizontal — rotates the image to make the straightening bar horizontal4 Click the Apply button .You can alsoStraighten a single layerStraighten all layers in the imageChoose a specific angle for the straighteningbarCrop the edges of the image to make itrectangular after straighteningFill the edge areas of your image with thebackground colorClick the layer name on the Layers palettebefore you begin.Mark the Rotate all layers check box on theTools Options palette.Type or set a value in the Angle control onthe Tools Options palette.Mark the Crop image check box on theTools Options palette.Unmark the Crop image check box on theTools Options palette.You can also double-click the image to apply the command.Correcting photographic perspectiveWhen you take pictures of tall objects, the resulting photographs may have perspectivedistortion — that is, the objects may seem to be leaning or angled. This distortionoccurs when the camera is at an angle to the subject.You can fix perspective distortion. For example, by using the Perspective Correctiontool, you can straighten a photo of a building with sides that should be straight butappear angled.Adjusting images 41