Testing Children’s Toys Continuedfrom Page 29ize that children, once they reach acertain age, might use a ball pointpen, but an ordinary ball point penis generally sold to consumers ofall ages. In other words, an ordinaryball point pen is not designed or intendedprimarily for children. In thisexample, the ball point pen is not achildren’s product. (Although thereare some instances when such a pencan become a children’s product.See http://www.cpsc.gov/library/foia/foia09/petition/wima_resp.pdf). The Commission may providefurther guidance on this issue in thefuture by rule.D. Must all children’s productsbe tested and certified forlead content?Another common questionis whether all children’s productsneed to be tested and certified forcompliance with the new 300 ppmlead content limits. The law limitsour ability to exempt products fromthe lead content limit. However, wehave found that certain products, bytheir nature, will never exceed thelead content limit so those productsdo not need to be tested and do notneed certifications to show that theycomply with the law. These productsinclude:1. Precious gemstones: diamond,ruby, sapphire, emerald;2. Semiprecious gemstonesand other minerals, provided thatthe mineral or material is not basedon lead or lead compounds: e.g.,aragonite, bayldonite, boleite, cerussite,crocoite, galena, linarite,mimetite, phosgenite, vanadinite,and wulfenite;3. Natural or cultured pearls;4. Wood (any paint on woodneeds to be tested and certified);Page 34 <strong>More</strong> <strong>Woodturning</strong> February 20105. Paper and similar materialsmade from wood or other cellulosicfiber, including, but not limited to,paperboard, linerboard and medium,and coatings on such paper that soakinto the paper and cannot be scrapedoff the surface;6. CMYK process printing inks(inks that must meet the testing andcertification requirements includespot colors, other inks that are notused in the CMYK process, and inksthat can be scraped off the surfaceon which they are used or that areused in after-treatment applications,including screen prints, transfers,decals, or other prints);7. Textiles (excluding aftertreatmentapplications, such asscreen prints, transfers, decals, orother prints) consisting of:a. Natural fibers (dyed or undyed)including, but not limitedto, cotton, kapok, flax, linen, jute,ramie, hemp, kenaf, bamboo, coir,sisal, silk, wool (sheep), alpaca,llama, goat (mohair, cashmere),rabbit (angora), camel, horse, yak,vicuna, qiviut, guanaco;b. Manufactured fibers (dyedor undyed) including, but not limitedto, rayon, azlon, lyocell, acetate,triacetate, rubber, polyester, olefin,nylon, acrylic, modacrylic, aramid,spandex;8. Other plant-derived andanimal-derived materials including,but not limited to, animal glue, bee’swax, seeds, nut shells, flowers, bone,sea shell, coral, amber, feathers, fur,and leather;9. Surgical steel and otherstainless steel within the designationsof Unified Numbering System,UNS S13800– S66286, not includingthe stainless steel designated as303Pb (UNS S30360), provided thatno lead or lead-containing metal isintentionally added. The non-steelor non-precious metal componentsof a product, such as solder or basemetals in electroplate, clad, or fillapplications must be tested andcertified;10. Precious metals: Gold (atleast 10 karat); sterling silver (atleast 925/1000); platinum; palladium;rhodium; osmium; iridium;ruthenium, titanium.The products on this list areall things the Commission has determineddo not contain lead over100 ppm, which is within the allowable300 ppm limit. Thus, theywill comply with the law (and mustalways comply) and, therefore, donot need testing and certification.They do not need to be tested by athird party laboratory to prove theyare, in fact, made of something onthe list, and they do not need to betested to prove that they meet thelead content limits. For example, wehave determined that natural fibers,such as cotton, by their nature donot contain lead in excess of thelead content limit; this means thatcotton blankets or t-shirts (withoutbuttons or appliqués), do not needto be tested by a third party laboratoryfor lead content. It also meansthat a third party laboratory wouldnot need to test the cotton shirt toshow that it is, indeed, made outof cotton. Some retailers may wantmanufacturers and importers to testand certify their products, but thosetests and certificates are not requiredby the Commission for the materialsor products on the list.Editor’s Note: It appears that unpaintedwood products do not needto be tested, so I have deleted theremainder of this announcement.You can read the entire statementat the AAW Website.
Tormek AnnouncesT-7 UpgradesThe three most recently addedimprovements to the Tormek T-7directly address concerns expressedby customers. New features improvestone changing, water managementand corrosion protection.“The new EzyLock system forthe grindstone uses a self-tighteningstainless steel knob to secure thegrindstone. No tools are requiredand you don’t need to exert anypressure on the nut to secure thegrindstone” says Tormek CEOHåkan Persson. This constructionalso makes it very easy to changegrindstones, from the standard aluminiumoxide to the new specialtystones (Blackstone Silicon and the4000 Grit Japanese Waterstone).Another improvement to theTormek T-7 is the new AdvancedWater Trough AWT-250. It addressescustomer concerns aboutwater splash while sharpeningcertain tools. The standard lip hasbeen enlarged considerably, and forthose long tools that drip water wellover the edge of the lip (like chef’sknives and planer blades) just addthe water chute, which attaches easilyand directs the water back intothe trough.The new water trough alsohas an incorporated magnet, whichattracts the steel cut from yourtools and keeps your stone cleanerand more free-cutting. For thosedrippy jobs where the water chute isneeded, Tormek has added a pair ofTilt Shoes for the T-7. When put onthe feet of the machine, they put theframe on a slight angle so that thewater that lands on the frame runsback into the water trough.The frame of the T-7 is nowtreated with an Electrodeposition(ED) coating that provides superiorcorrosion protection and forms thefoundation for the tough powdercoat paint finish. This combinationfinish is designed to withstand evenoutdoor environments (but don’ttake your Tormek outside – themotor and electrical system are notweatherproof).For those who already own aTormek T-7 or 2000 the AdvancedWater Trough with tilt shoes and theEzyLock shaft system MSK-250will soon be available as upgradesthat will fit any 250 mm/10” machine.For details of your neareststockist log onto www.affinitytool.com or call 1-866-588-0395.VERMECCHUCK DRIVE DOG• For Vermec, Vicmarc, or small Nova Bonhamchucks• Held by chuck jaws for quick mounting andremoval• Domed surface allows alignment in variouspositions• Pins are Adjustable and Replaceable• Centre Pin is hardened•For Further Information:Web: www.vermec.comEmail: vermec@netspace.net.au39 Dalton Street, Kippa-Ring QLD 4021 AUSTRALIAPh: +61 7 3284 3733 Fax: +61 7 32842733PROUDLY MADE IN AUSTRALIAPage 35 <strong>More</strong> <strong>Woodturning</strong> February 2010