WatchGuard Firebox System 7.0 User Guide

Chapter 5: Using Policy Manager to Configure Your NetworkAdding Secondary NetworksYour configuration may require that you add secondarynetworks to any of the Firebox interfaces. For more informationon secondary networks, see “Adding secondarynetworks to your configuration” on page 33.1 Select Network => Configuration.The Network Configuration dialog box appears.2 Click the Secondary Networks tab.The Secondary Networks tab appears, as shown in the followingfigure.3 Use the drop-down list in the lower-right portion of thedialog box to select the interface to which you want toadd a secondary network.4 Use the field in the lower-left portion of the dialog boxto type an unused IP address from the secondarynetwork.When typing IP addresses, type the digits and periods insequence. Do not use the TAB or arrow key to jump past theperiods. For more information on entering IP addresses, see“Entering IP addresses” on page 43.64 WatchGuard Firebox System