WatchGuard Firebox System 7.0 User Guide

Using AliasesGroupfireboxtrustedoptionalexternaldvcp_netsdvcp_local_netsFunctionAddresses assigned to the three Firebox interfacesand any related networks or device aliasesAny host or network routed through the physicaltrusted interfaceAny host or network routed through the physicaloptional interfaceAny host or network routed through the physicalexternal interface; in most cases, the InternetAny network behind the DVCP clientAny network behind the DVCP serverA host alias takes precedence over a Windows NT orRADIUS group with the same name.Adding an aliasFrom Policy Manager:1 Select Setup => Aliases.The Aliases dialog box appears, as shown in the following figure.2 Click Add.3 In the Host Alias Name text box, enter the name usedto identify the alias when configuring services andauthentication.4 Click Add.The Add Address dialog box appears, as shown in the followingfigure.User Guide 163