WatchGuard Firebox System 7.0 User Guide

Chapter 8: Configuring Filtered Services7 In the Client Port text box, select an option from thedrop-down list. Note that you can select a range ofport numbers. The following options are available:IgnoreSource port can be any number (0—65565). (If youare not sure which port setting to use, choose thisoption.)SecureSource port can range from 0—1024.PortSource port must be identical to the destinationport, as listed in the Port number field of thedestination service’s Properties dialog box,Properties tab (shown below).ClientSource port can range from 1025—65565.8 In the Port field, enter the port number. If you areentering a range, enter the lowest number of the range.9 In the To field, enter the highest number of the range.(If you are not entering a range, leave this field blank.)10 Click OK.Policy Manager adds the port configuration to the New Servicedialog box. An example of how this dialog box might lookappears in the following figure. Verify that the name, description,and configuration of this service are correct. If necessary, clickAdd to configure an additional port for this service. Repeat theprocess until all ports for the service are configured.122 WatchGuard Firebox System