WatchGuard Firebox System 7.0 User Guide

Chapter 6: Managing and Monitoring the Firebox6 To cancel the changes you have made in this dialog boxsince opening it, click Reset to Defaults.Copying messages to another applicationTo copy a log message so you can paste it into anotherapplication such as email or Notepad, right-click the messageand select Copy Selection. You can then open up theother application and paste in the message.Copying or analyzing deny messagesYou can use several tools to copy and analyze deny messages:• To copy a deny message and paste it into anapplication, use the procedure in the previous section.• To copy the source or destination IP address of a denymessage so you can paste it into another application,right-click the message, select Source IP => Copy orDestination IP => Copy.• To issue the ping command to a source or destinationIP address of a deny message, right-click the messageand select Source IP => Ping or Destination IP => Ping.(When you issue this command, you are prompted toenter the configuration passphrase.)• To issue a traceroute command to a source ordestination IP address of a deny message, right-clickthe message and select Source IP => Trace Route orDestination IP => Trace Route. (When you issue thiscommand, you are prompted to enter the configurationpassphrase.)Performing Basic Tasks with System ManagerThe basic tasks you perform with System Manager are:• Running the QuickSetup Wizard82 WatchGuard Firebox System