Overload Protection Devices English

Special modelsImpact load detection1A inputUpper-lower limit detectionAdditional specificationsSubtropical specificationsSupport for abnormal voltage of control power supplyOutline of specificationsSeparately from the usual overload, abnormally large current is instantly detected andoutputted. Impact load settings can be set from 30%-300%. Impact load shock time is within0.05s. Other functions and outline dimensions conform to product standards.When the secondary side of CT is 1A, it can input directly to the Shock Relay.(It's not necessary to consider motor capacity.)Other specifications and outline dimensions conform to product standards.Detects both overload and under-loads; however, because there is 1 output relay,it cannot distinguish between upper and lower limits.Outline of specificationsCan be used when ambient humidity is 90% RH and below. Other specifications conform to standard products.Power source voltage: AC230V, AC240V, AC115V, AC120V (please contact us for more information on other voltages)Special unit modelTSB151MTSB152MOrder symbolPanel installation It can be mounted on the control panel surface and operated.The integral multiple can be extended for a maximum of 60 seconds.PStart time modification The front panel scale becomes an integral multiple (x2, x3 •••).Other specifications conform to standard products.T1The integral multiple can be extended for a maximum of 60 seconds.Shock time modification The front panel scale becomes an integral multiple (x2, x3 •••).Other specifications conform to standard products.T2Automatic reset For the 150 Series only, the self-holding output relay can be changed to automatic reset. HTSB152CTSB151WTSB152WSV82