Overload Protection Devices English

NameControl pwersupply voltageGroundCurrent sensorMotor voltageFWDSTOPREVCount upoutputSymbolPOWERE−1515C−C+FGUVWacbcaccabIN/OUTIN−OUTOUTININ−INININOUTOUTOUTOUTOUTOUTOUTOUTOUTPinExplanationNo.11Connection of control power supply1210 Ground terminal161718 Sensor cable192012 Motor voltage input terminal35Order of forward rotation64Order of stop1s shot78Order of reverse rotation913Count-up output141s shot15 No. Parameter DataData whenshipmentContents1 Parameter lock(1) UnlockCan change parameter setting(1) Can not change parameter setting unless in an(2)Lockunlocked condition2 Motor voltage(1)200-230VMotor voltage 3 phase 200V class(1)(2)380-460VMotor voltage 3 phase 400V class(1)0.1kW (13)22kW(2)0.2kW (14)30kW(3)0.4kW (15)37kW(4)0.75kW (16)45kW(5)1.5kW (17)55kW3 Motor kW(6)2.2kW (18)75kW0.75kW Setting motor capacity.(7)3.7kW (19)90kWParameter (21)132kWto(8)5.5kW (20)110kW(23)200kWcan beset only for a(9)7.5kW (21)132kW400Vclass motor.(10)11kW (22)150kW(11)15kW (23)200kW(12)18.5kW4 No load levelUnused5 200%Unused Prevention of idle running5 Overload level 5 200%100 Overload detection level6 Start time 1 300s5 Setting the start time7No loadTime between after under-running no load0.1 60min 15.0continuing levellevel until COUNTUP output8Overload duration MINtime (Overload time) 0.1 10.0s1.0 Shock time when overload occurs9 Pause time (1) 1 600s10 Pause time during switching from forward to reverse rotation10 Reverse time 1 600s5 Reverse running time11 Pause time (2) 1 600s10 Pause time during switching from reverse to forward rotation12 No. of reverse rotation 1 10 times5 No. of reverse rotation until COUNTUP output13Reverse PlusTime to count the no. of reverse rotation.10rotation 1 600sAdd to 1 cycle time(1)QUICK14 Response (2)NORMAL(2) Number of moving average operations(3)SLOW15 LCD Backlight(1)AlwaysSetting the backlight(1)(2)2minillumination time149