Overload Protection Devices English

TSBSU05-2TSBSU30-2TSBSU60-2Model No.Current setting range 1, 2TSBSU05-20.55ATSBSU30-2330ATSBSU60-2560AShock Time setting range 1Current setting accuracyControl power supply voltage (A1 – A2)Maximum motor circuit voltageCurrent detection system0.230s±10% (full scale)AC 100240V±10% 50/60HzAC 600V 50/60Hz 32 phase CT systemDisplayOutput relayWork environmentInsulation resistanceMON lampUC lampContact arrangementContact ratingRecommended amperes (in case of frequent operation)Minimum application load 4OperationSelf-holdingLifeReset methodAmbient temperatureStorage temperatureHumidityAltitudeAtmosphereVibrationBetween case and circuitNormal monitoring state: MON lamp (green) is onDetection of under current: UC lamp (red) is on1c3A AC250V cos=10.2A and below AC250V cos=0.4DC10V, 10mARelay is excited when trippingYes (refer to the diagram shown in the next page)100,000 times at contact rating loadRESET button: ON or Power source: off2060°C3070°C4585%RH; no condensation2000m and belowNo corrosive gas nor dust; Pollution degree 3 and below; in the control box5.9m/s 2 and below10M and above (DC500V megger)Between case and circuitAC2000V 60Hz 1 min.WithstandBetween contactsAC1000V 60Hz 1 min.voltageBetween circuitsAC2000V 60Hz 1 min.MaterialsCasePolycarbonate, UL94V0Cover for terminalsNylon 6DimensionsMassPower consumptionMountingMain unit (including CT)Main unit (including CT)2VA and below35mm DIN rail or attached bracketLength 62 x width 54 x height 66mm0.2kg 107