Transformer Stations - Bosecker

Transformer compact stations• Bosecker compacttransformer stations ...… are used in all placeswhere a high energy outputis required at one spot, e.g.in residential and industrialareas, on large constructionsites and on fairs.• SafetyBosecker compact stationsare produced and type-testedaccording to IEC 62271-202„High voltage/low voltageprefabricated substation”.The internal arc fault test, thetemperature rise test and theEMC test are the most essentialtests of this standard.”• Material• Doors• Locking system• Ventilation systemAll external enclosure elementsare made of stainlesssteel (steel grade no. 1.4301).The supporting frame of thelow voltage switchgear as wellas the internal covers consistof hot-galvanised sheet steel.Enclosures made of hot-galvanisedsheet steel availableon request.• Lacquer coatingAll doors are equipped withself-engaging door stopswhich protect the operatorfrom the hazards of slammingdoors.The doors are locked bymeans of a bar lock withpivoted lever and aEuro profi le cylinder lock.On request a pivoted leverfor a double locking systemor a padlock can be fi t in.A labyrinth ventilation systeminside the roof structure, theside walls and the doorsensures that lost heat fromthe transformer is quicklydissipated. Furthermore theventilation system avoidscondensation water on theinstallations. Additionallyprotective sheets at the sidewalls prevent the interior frombeing heated up excessivelyby the sunlight.All Bosecker compact stationshave a heavy-metalfree two-component lacquercoating. Colour optional accordingto RAL colour chart.• MaintenanceThe enclosure consists ofmaintenance free material.Should damages be causedfor mechanical reasons,doors or wall elements canbe exchanged. Due to theuse of stainless steel a damageto the lacquer coatingwill not cause corrosion.22We plan and produce special versions according to your requirements. Please ask us.