pipe clamps - heavy series

TEChnical appendixTightening Torques and Maximum Loads in Pipe DirectionTightening Torques and Maximum Loads in Pipe DirectionAll tightening torques and maximum loads in pipe direction regard clampswith upper plates and hexagon head bolts according to EN ISO 4014/4017.FThe value of the load F is an average value of testsperformed with steel tube Fe360.If the stress of the clamp in an axial direction of the pipe,the pipe slides into the clamp.Sliding starts when F value is reached.CodePI.EFFE.CI.C1Hexagon head bolt(EN ISO 4014/4017)Tighteningtorque(Nm)STANDARD SERIESPolypropylene Polyamide AluminiumMax load in pipedirection F(KN)Tighteningtorque(Nm)Max load in pipedirection F(KN)Tighteningtorque(Nm)Max load in pipedirection F(KN)8 0,7 10 0,7 12 3,6C2 8 1,2 10 0,9 12 4,3C3 8 1,5 10 1 12 4,4C4 8 1,7 10 1,8 12 4,8C5 M68 1,8 10 1,9 12 5,2C6 8 2 10 2,1 12 7,5C7 8 2,2 10 2,8 12 9C8 8 2,3 10 2,5 --- ---C9 8 2,4 10 2,5 --- ---CodePI.EFFE.CI.CP1Hexagon head bolt(EN ISO 4014/4017)Tighteningtorque(Nm)HEAVY SERIESPolypropylene Polyamide AluminiumMax load in pipedirection F(KN)Tighteningtorque(Nm)Max load in pipedirection F(KN)Tighteningtorque(Nm)Max load in pipedirection F(KN)13 1,8 21 4,5 32 13CP2 M1013 3 21 4,7 32 16CP3 15 3,5 25 5,2 37 16,5CP4 M12 30 8,5 40 9,5 55 30,5CP5 M16 46 11,5 56 27 125 36,5CP6 M20 80 15 155 25 225 62,5CP7 M24 110 30 200 34 250 71,7CP8190 41 360 50 500 86,5CP9 M30210 125 380 130 500 190,5CP10 270 168 450 180 600 244,5CodePI.EFFE.CI.Hexagon head bolt(EN ISO 4014/4017)Tightening torque(Nm)PolypropyleneTWIN SERIESMax load in pipe direction F(KN)Tightening torque(Nm)PolyamideMax load in pipe direction F(KN)CF1 M6 6 1,1 6 1,1CF213 2,5 13 2,5CF3 13 2,1 13 2,1M8CF4 13 2,9 13 3,1CF5 9 2,2 9 2,777