PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(445) bad high address in -A spec - * (Linker)The high address given in a -A specification is invalid: it should be a valid number, in decimal, octalor hexadecimal radix. The radix is specified by a trailing O, for octal, or H for hex. A leading 0x mayalso be used for hexadecimal. Case in not important for any number or radix. Decimal is the default,e.g.:-ACODE=0h-ffffDid you forget the radix?-ACODE=0h-ffffhSee Section 5.7.20 for more infomation.(446) bad overrun address in -A spec - * (Linker)The overrun address given in a -A specification is invalid: it should be a valid number, in decimal,octal or hexadecimal radix. The radix is specified by a trailing O (for octal) or H for hex. A leading0x may also be used for hexadecimal. Case in not important for any number or radix. Decimal isdefault, e.g.:-AENTRY=0-0FFh-1FFDid you forget the radix?-AENTRY=0-0FFh-1FFh(447) bad load address in -A spec - * (Linker)The load address given in a -A specification is invalid: it should be a valid number, in decimal, octalor hexadecimal radix. The radix is specified by a trailing O (for octal) or H for hex. A leading 0x mayalso be used for hexadecimal. Case in not important for any number or radix. Decimal is default,e.g.:-ACODE=0h-3fffh/a000Did you forget the radix?-ACODE=0h-3fffh/a000h283