PicC 9.50 dsPIC Manual.pdf

DSPICC Compiler OptionsDSPICC Command-line DriverTable 2.4: Supported IDEsSuboptionhitideIDEHI-TECH Software’s HI-TIDETable 2.5: Supported languagesSuboptionen, englishfr, french,francaisde, german, deutschIDEEnglishFrenchGerman2.4.31 --LANG=language: Specify the Language for MessagesThis option allows the compiler to be configured to produce error, warning and some advisory messagesin languages other than English. English is the default language and some messages are onlyever printed in English regardless of the language specified with this option.Table 2.5 shows those langauges currently supported.2.4.32 --MEMMAP=file: Display Memory MapThis option will display a memory map for the specified map file. This option is seldom required,but would be useful if the linker is being driven explicitly, i.e. instead of in the normal way throughthe driver. This command would display the memory summary which is normally produced at theend of compilation by the driver.2.4.33 --MSGFORMAT=format: Set Advisory Message FormatThis option sets the format of advisory messages produced by the compiler. See Section 2.4.26 forfull information.2.4.34 --NOEXEC: Don’t Execute CompilerThe --NOEXEC option causes the compiler to go through all the compilation steps, but without actuallyperforming any compilation or producing any output. This may be useful when used in con-16