Owner's manual - Roland

Using the SD-50 as a MIDI Sound ModuleAdjusting the Pan and Effect DepthYou can specify the pan (stereo position) of each part, and adjust the depth of the reverb and chorus effects for eachpart.page_part_edit-1.eps1. Press the [PART] button a number of times to access the Part Edit screen.page_part_edit-3.eps2. Turn the [VALUE] dial to select the effect whose settings you want to adjust, and then press the[ENTER] button.Setting Value ExplanationPan 0–127 Left/right balance of the sound.Reverb Send 0–127 Depth of reverb. Choose “0” if you don’t want to apply reverb.Chorus Send 0–127 Depth of chorus. Choose “0” if you don’t want to apply chorus.3. Turn the [VALUE] dial to adjust the setting.The pan and effect settings you specify will be saved in internal memory if you save the studio set (p. 54).51