Owner's manual - Roland

Using the SD-50 as a MIDI Sound ModuleAdjusting the Settings of Each PartFor each part, you can adjust its volume and other settings, and apply effects to the sound.Muting/Soloing a PartYou can “mute” a specific part so that it will not produce sound.Conversely, you can “solo” a specific part so that it will play while all of the other parts are muted.page_part_meter.eps1. Press the [PART] button a number of times to access the MIDI part screen.page_part_meter-1.eps2. Turn the [VALUE] dial to select the part that you want to mute or solo, and then press the [ENTER]button.page_part_meter-s.eps3. Turn the [VALUE] dial to change the setting.SettingMSExplanationMutedSoloedThe mute and solo settings will be saved in internal memory if you save the studio set (p. 54).49