Owner's manual - Roland

Installing the Driver7. Check to make sure that MIDI transmission and reception takes place normally.1. Click “Test Setup.”2. Turn down the SD-50’s volume.The following step will cause a fairly loud sound to be produced from the SD-50.fig.XXXXXXXXXXXXX3. Click the SD-50’s downward arrow.If the SD-50 produces sound, the settings are correct.ClickClick4. Click “Test Setup” once again to end the test.8. From the [Audio MIDI Setup] menu, select [Quit Audio MIDI Setup] to finish making settings.Caution when recording or playing back with your softwareCheck the following points before you use the SD-50 to record or play back.• Connect the SD-50 to your Macintosh before you start up the software you’re using.• Do not disconnect the SD-50’s USB cable from your Macintosh while your software is running. Closethe software you’re using before you disconnect the SD-50’s USB cable from your Macintosh.• The SD-50 will not work with the Mac OS X Classic environment. Use the SD-50 when the classicenvironment is not running.37