Owner's manual - Roland

Installing the DriverUsing the SD-50 with iTunesHere’s how to specify the SD-50 as the sound output device so that it can be used with iTunes.In “Verifying That You Hear Sound” (p. 38), you’ll use iTunes to play back sample data. Be sure to make the settingsdescribed below.* The content displayed may differ depending on your system.1. In [System Preferences], click [Sound].2. Click the [Output] tab.Select [SD-50 44.1kHz].3. When you’ve finished making the setting, close [System Preferences].MIDI input/output device settings1. Double-click [Audio MIDI Settings] (/Applications/Utility) to start it up.2. Access the dialog box.Mac OS X 10.6 or laterFrom the [Window] menu, choose [Show MIDI Window] to open “MIDI Studio”Mac OS X 10.5 or earlierClick the [MIDI Devices] tab.fig.osxaudiomidi1-e.eps3. Verify that [SD-50] is shown in the “MIDI Studio” or “Audio MIDI Settings” dialog box.If the SD-50 is not shown or is grayed-out, the SD-50 has not been recognized correctly. Try clicking [Rescan MIDI].You can also try disconnecting the USB cable connected to the SD-50, then re-connecting it.35