Owner's manual - Roland

More documents

Recommendations

Info

Turning the Power On/OffTurning the Power On/OffTurning the Power On941fig.power_e.epsOnce the connections have been completed (p. 20), turn on power to your various devices in the orderspecified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakersand other devices.[POWER] switch[VOLUME] dial1. Verify the following before you turn on the power.• The AC adaptor is correctly connected, or batteries are correctly installed.• If using bus power, the SD-50 is correctly connected to the computer and the driver is installed.• The peripheral devices are correctly connected.• The volume of the SD-50 and of the connected equipment is minimized.9422. Set the [POWER] switch to DC IN/BATTERY.If you’re using bus power, set the [POWER] switch to BUS.* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unitwill operate normally.3. Use the [VOLUME] dial to adjust the volume.4. Adjust the volume of the connected equipment.Turning the Power Off1. Minimize the volume of the SD-50 and the connected equipment.2. Switch off the power on the connected audio equipment.3. Turn the [POWER] switch OFF.The display will go dark and the power will turn off.22
Installing the DriverA driver is software that transfers data between the SD-50 and the application software on your computer when theSD-50 is connected to your computer.The procedure for installation and checking will depend on your system. Perform the following three steps to installand check the driver.The procedure for installation and checkingWindows 7 /Windows VistaWindows XPMac OS X1. Install the driver p. 24 p. 28 p. 332. Input/output device settings p. 26 p. 31 p. 343. Verifying that you hear sound p. 38 p. 38 p. 38* If you are using the SD-50’s player function (p. 61), the SD-50 cannot be used while connected to a computer.23
Page 3 and 4: Owner’s manual201aBefore using th
Page 5 and 6: USING THE UNIT SAFELY010●This uni
Page 7 and 8: IMPORTANT NOTESPower Supply: Use of
Page 9 and 10: ContentsUSING THE UNIT SAFELY......
Page 11 and 12: ContentsSystem Settings............
Page 13 and 14: Getting Ready13
Page 15 and 16: Names of Things and What They Do6[T
Page 17 and 18: Names of Things and What They DoSet
Page 19 and 20: Names of Things and What They DoBot
Page 21: Turning the Power On/Offfig.Battery
Page 25 and 26: Installing the Driverfig.win7uac_e.
Page 27 and 28: Installing the DriverSettings when
Page 29 and 30: Installing the Driverfig.xpdrv4-e.e
Page 31 and 32: Installing the DriverInput/Output D
Page 33 and 34: Installing the DriverMac OS X Users
Page 35 and 36: Installing the DriverUsing the SD-5
Page 37 and 38: Installing the Driver7. Check to ma
Page 39 and 40: Installing the DriverPlaying Back t
Page 41 and 42: Using Playlist EditorCreating a Pla
Page 43 and 44: Operation43
Page 45 and 46: Using the SD-50 as a MIDI Sound Mod
Page 55 and 56: Using the SD-50 as an Audio Interfa
Page 61 and 62: Using the SD-50 as an SMF/Audio Pla
Page 73 and 74:
System SettingsSystem Setting ListI
Page 75 and 76:
Utility FunctionsBacking Up User Da
Page 77 and 78:
Utility FunctionsReturning to the F
Page 79 and 80:
Appendix79
Page 81 and 82:
About V-LINKWhat is V-LINK?V-LINK (
Page 83 and 84:
Driver SettingsThe settings window
Page 85 and 86:
Driver SettingsMAC OS X Users1. Use
Page 87 and 88:
Reinstalling the DriverMac OS X Use
Page 89 and 90:
TroubleshootingEven though you set
Page 91 and 92:
TroubleshootingProblems with USB Me
Page 93 and 94:
TroubleshootingCould other software
Page 95 and 96:
TroubleshootingProblems with Playba
Page 97 and 98:
TroubleshootingCheck the power mana
Page 99 and 100:
TroubleshootingSettings for Your Co
Page 101 and 102:
TroubleshootingSystem “Performanc
Page 103 and 104:
TroubleshootingVoice communication
Page 105 and 106:
Settings Saved as User DataThe foll
Page 107 and 108:
Solo ToneFeatures of the Solo sound
Page 109 and 110:
SpecificationsSD-50:128 Voices Soun
Page 111 and 112:
IndexAA-B Repeat ..................
Page 113 and 114:
MEMO113
Page 115 and 116:
MEMO115
Page 117 and 118:
fig.16_ChineseRoHS.epsFor Chinafig.
Page 120:
* 5 1 0 0 0 1 1 3 4 6 - 0 1 *
show all

Owner's manual - Roland

Create successful ePaper yourself

Delete template?

Save as template?