PIBV2 Supervisory Switch

PIBV2 Supervisory SwitchModels AvailablePIBV2PIBV2APost Indicator/ButterflyValve Supervisory SwitchPost Indicator/ButterflyValve Supervisory Switch(ULC/Canadian)PIBV2Replacement PartsA3010-00 Replacement Hardware Kit546-7000 Cover Tamper Switch KitS07-66-XX Tamper Screws for CoverWFDW Cover WrenchHEXW Replacement Hex WrenchProduct OverviewNEMA 3R rated enclosureBi-directional actuatoraccommodates rising or falling flagsSingle side conduit entry does notrequire right angle fittingsAdjustable length actuator eliminatesthe need for cutting the shaftAccommodates up to 12 AWG wireTwo SPDT contacts are enclosed in adurable terminal block for added strength100% synchronization activates bothalarm panel and local bell simultaneouslySystem Sensor’s PIBV2 supervisory switch monitors the open position of postindicator and butterfly control valves.Robust Construction. The PIBV2 consists of a rugged housing, intended forindoor and outdoor use. When installed with the actuator in the verticalposition, the PIBV2 is NEMA 3R rated per UL.Application Flexibility. The PIBV2 features a flexible design that accommodatespost indicator, butterfly, and many other types of wall post, recessed wall postand pressure reducing valves. The PIBV2’s unique bi-directional actuatorallows the unit to be installed in either rising or falling flag installations.Simplified Operation. Installation is made easier with the PIBV2’s single sideconduit entrance. By providing a direct conduit pathway to the electricalsource, right angle fittings are not required. Installation is further simplifiedby the PIBV2’s adjustable length actuator, which eliminates the needfor cutting the shaft.Reliable Performance. The PIBV2 is equipped with tamper resistant coverscrews to prevent unauthorized entry. Inside, two sets of SPDT (Form C)synchronized switches are enclosed in a durable terminal block to assurereliable performance.

Engineering SpecificationsModel shall be model number PIBV2 Post Indicator Butterfly Valve supervisory switch as manufactured by System Sensor.PIBV2 shall be installed on each valve as designated on the drawings and/or as specified herein. Switches shall be mounted soas not to interfere with the normal operation of the valve and shall be adjusted to operate within two revolutions of thevalve control or when the valve flag has moved no more than one-fifth of the distance from its normal position. The mechanismshall be contained in a weatherproof die cast metal housing, which shall provide a side entrance for 1 /2″ conduit andincorporate a 1 /2″ NPT nipple for attachment to the valve body. A grounding provision is provided. The switch assemblyshall include two switches each with a rated capacity of 10 Amp @ 125/250V AC and 2.5 Amp @ 24V DC. The cover shallcontain tamper-resistant screws for which a security wrench will be provided with each switch. PIBV2 shall be UnderwritersLaboratories listed for indoor or outdoor use. The PIBV2 shall be Factory Mutual, CSFM, and MEA approved.Standard SpecificationsContact RatingsTwo sets of SPDT (Form C)10.0 A @ 125/250V AC2.5 @ 6/12/24V DCOverall Switch Dimensions4 1 /4″H x 3 1 /2″W x 3 1 /4″D(10.8cm x 8.9cm x 8.2cm)Maximum Stem Extension2 1 /8″ (5.4 cm)Mounting1/2″ NPT nippleOperating Temperature Range32°F to 120°F (0°C to 49°C)Note: The PIBV2 will operate from –40°F to 120°F(–40°C to 49°C); however UL does not test controlvalve supervisory switches below 32°F (0°C).Enclosure RatingUL indoor/outdoorNEMA 3R when mounted with the actuator verticalCover Tamper SwitchStandard with ULC modelOptional for UL model, part no. 546-7000Shipping Weight2 lbs. (0.9 kg)Service UseAutomatic Sprinkler: NFPA 13One or Two Family Dwelling: NFPA 13DResidential Occupancies up to 4 stories: NFPA 13RNational Fire Alarm code: NFPA 72Warranty3 yearsU.S. Patent No.5,213,205Conduit EntrancesOne single side open for 1 /2″ conduitElectrical Connections for PIBV2Top ViewSwitch 1PIBV2 MountingTHE FOLLOWING ARE EXAMPLES OFACCEPTABLE MOUNTING POSITIONS:THE FOLLOWING MOUNTINGPOSITION IS NOT ACCEPTABLE:COMA B B AStrip GageSup. SwitchCOMSwitch 2Sup. SwitchCONTACT RATINGS125/250 VAC24 VDC10 AMPS2.5 AMPSBBBBto nonsilenceable initiatingzone of listed FACPCOMCOMCOMCOMend-of-line resistorTypical FACP ConnectionACTUATORVERTICAL (DOWN)Ordering InformationModel NumberPIBV2PIBV2AACTUATORHORIZONTALACTUATOR VERTICAL(POINTING UP)Descriptionto power sourcecompatiblewith bellPost Indicator/Butterfly valve supervisory switchPost Indicator/Butterfly valve supervisory switch (ULC modelBCOMTypical Local Bell ConnectionlocalbellBreak wire as shown for supervisionof connection. DO NOT allow strippedwire leads to extend beyond switchhousing. DO NOT loop wires.Part NumberDescriptionA3010-00 Replacement hardware kit (wrenches, screw pack)546-7000 Cover tamper switch kitS07-66-XXTamper screws for coverWFDWReplacement tamper proof wrench for coverHEXWReplacement hex wrenchSystem Sensor Sales and ServiceSystem Sensor Headquarters3825 Ohio AvenueSt. Charles, IL 60174Ph: 800-SENSOR2Fx: 630/377-6495Documents On Demand:1-800-736-7672 x3Web: www.systemsensor.comSystem Sensor in CanadaPh: 905.812.0767Fx: 905.812.0771System Sensor in EuropePh: + 44.1403.276500Fx: + 44.1403.276501System Sensor in ChinaPh: + 86.29.524.6253Fx: + 86.29.524.6259System Sensor in SingaporePh: + 65.273.2230Fx: + 65.273.2610System Sensor in the Far EastPh: + 852.21919003Fx: + 852.27366580System Sensor in AustraliaPh: + 613.54.281.142Fx: + 613.54.281.172System Sensor in IndiaPh: + 91.11.558.2119Fx: + 91.11.567.6815©2000 System Sensor. The company reserves the right to change product specifications without notice. A05-197-05•8/00(10K)•#672