ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Sit... - Alsys Data
ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Sit... - Alsys Data ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Sit... - Alsys Data
54 Site PreparationThe following illustration shows the maximum allowable dimensionsfor the display opening when the optional cosmetic bezel is not used.Gasket must meet inside surface of customapplication's display opening. This is to providea secure and watertight fit.312.5 mm12.305 in. 13.7 mm0.540 in.27.5 mm1.083 in.235.6 mm9.275 in.Use four #8-32 machine screws in thecorners of the unit to mount the displayinto an enclosure. Six total screws maybe used for multiple mounting configurations.345.4 mm13.6 in.156.2 mm6.15 in.175 mm6.888 in.141.6 mm5.575 in.292.4 mm11.51 in.22.9 mm0.900 in.200.7 mm17.2 mm7.9 in.0.678 in.19101
Site Preparation 55K/F 502 Flush Wall MountThe Core Module (without either mount) can be mounted flush againsta wall. The following shows mounting configuration and brackets:Flush Mount w/Power SupplyMounted on the Outside WallFlush Mount w/Power SupplyMounted on the Inside Wall16683Note: Refer to the Cable Illustrations section for cable pass-through holesizes.
- Page 21 and 22: Site Preparation 3Interpreting the
- Page 23 and 24: Site Preparation 5Customer Responsi
- Page 25 and 26: Site Preparation 77401-2xxx and 3xx
- Page 27 and 28: Site Preparation 97401-2xxx and 3xx
- Page 29 and 30: Site Preparation 11Operating and Se
- Page 31 and 32: Site Preparation 137401-22xx/26xx T
- Page 33 and 34: Site Preparation 157401-25xx/26xx (
- Page 35 and 36: Site Preparation 177401-K540 (12.1
- Page 37 and 38: Site Preparation 197401-K580/590 w/
- Page 39 and 40: Site Preparation 217401 with 2336-K
- Page 41 and 42: Site Preparation 23EasyPoint 45 Ped
- Page 43 and 44: Site Preparation 25NCR 2189 Cash Dr
- Page 45 and 46: Site Preparation 277196 Thermal Rec
- Page 47 and 48: Site Preparation 29Component Weight
- Page 49 and 50: Site Preparation 317401 Power Requi
- Page 51 and 52: Site Preparation 33Power Consumptio
- Page 53 and 54: Site Preparation 35Cable Routing Co
- Page 55 and 56: Site Preparation 377401-4xxxExterna
- Page 57 and 58: Site Preparation 39Terminal with K5
- Page 59 and 60: Site Preparation 41Terminal with K5
- Page 61 and 62: Site Preparation 43Lag Screws (6)1.
- Page 63 and 64: Site Preparation 45Printer Only Mou
- Page 65 and 66: Site Preparation 47Considerations f
- Page 67 and 68: Site Preparation 4912.1-inch LCD No
- Page 69 and 70: Site Preparation 51Mounting Specifi
- Page 71: Site Preparation 53Mounting Specifi
- Page 75 and 76: Site Preparation 577401-4xxx Mounti
- Page 77 and 78: Site Preparation 597401-4xxx EasyPo
- Page 79 and 80: Site Preparation 61System CablesCab
- Page 81 and 82: Site Preparation 63Cable Illustrati
- Page 83 and 84: Site Preparation 65External Paralle
- Page 85 and 86: Appendix A: Transient ProtectionAC
- Page 87 and 88: Index—1—12.1 Inch LCD No-Cabine
- Page 90: B005-0000-1255 Dec 2002 Printed on
<strong>Sit</strong>e Preparation 55K/F 502 Flush Wall MountThe Core Module (without either mount) can be mounted flush againsta wall. The following shows mounting configuration and brackets:Flush Mount w/Power SupplyMounted on the Outside WallFlush Mount w/Power SupplyMounted on the Inside Wall16683Note: Refer to the Cable Illustrations section for cable pass-through holesizes.