4 <strong>Sit</strong>e PreparationRelated <strong>Sit</strong>e Preparation <strong>Data</strong>AC Power and Communications WiringTitleNCR Ethernet Communications Wiring GuideNCR Terminal AC Power Wiring GuidelinesOrder NumberBST0-2118-82BST0-2115-53PeripheralsTitleNCR 7158 Thermal Receipt/Impact PrinterNCR 7166 Thermal Receipt/Impact PrinterNCR RealPOS 7167 Two-Station POS Printer Owner’sManualNCR 7194 Thermal Receipt Printer Owner’s GuideNCR 7196 Thermal Receipt PrinterNCR RealPOS 7197 Receipt Printer Owner’s ManualNCR <strong>7401</strong>-K580 Self-Service Printer Owner’s Guide(Discontinued)NCR <strong>7401</strong>-K590 Self-Service Printer Owner’s GuideOrder NumberB005-0000-1112B005-0000-1002B005-0000-1406B005-0000-1094B005-0000-1170B005-0000-1409B005-0000-1139B005-0000-1346Accessing Information ProductsElectronic versions (PDF format) are available on the Web at thefollowing locations:• http://inforetail.AtlantaGA.NCR.COM (NCR only)• http://www.info.NCR.COM (Anyone)
<strong>Sit</strong>e Preparation 5Customer ResponsibilitiesBefore the system can be installed, the customer must do or provide thefollowing:• When required by NCR, provide the NCR Customer Servicesrepresentative with appropriate drawings that indicate:− Location of the equipment−−<strong>Sit</strong>e wiring (power and communications, paths and lengths)Location of other equipment that may generate electrical noise,electromagnetic interference, or heat.• Make building alterations necessary to meet wiring and other siterequirements• Provide and install all communications cables, wall jacks, specialconnectors, and associated hardware• Provide and install necessary power distribution boxes, conduits,grounds, lightning protection devices, and associated hardware• Make sure all applicable codes, regulations, and laws (including,but not limited to, electrical, building, safety, and health) are met• Provide and install auxiliary power or other equipment as required• Provide storage or service areas as required• Meet all system/unit environmental requirements• Provide and install floor coverings and environmental systems thatlimit or control static electricity build-up and dischargeIn general, keep the NCR equipment area free from dust, smoke, lint,and other particles. Restrict smoking, eating, and drinking around theequipment. Avoid locating the equipment near other machines thatgenerate ink, carbon, and paper dust particles.Finally, only the customer can know the full extent of the damage thatmay be caused to his business by reason of failure of the equipmentthat is to be installed. For this reason, it is the customer's responsibilityto ascertain the extent of any such possible damage to his existing orplanned business, and to effect full insurance for all eventualities.