iG5A, product manual - H2flow

CHAPTER 7 - BASIC FUNCTIONS7.1 Frequency mode• Keypad Frequency setting 1Group Code Parameter Name Setting Range Initial UnitDrive group 0.00 [Frequency Command] - 0 ~ 400 0.00 HzFrq [Frequency mode] 0 0 ~ 9 0• Set Frq – [Frequency mode] to 0 {Frequency setting via Keypad 1}.• Set the desired frequency in 0.00 and press the Prog/Ent (•) key to enter the value intomemory.• The value is settable less than F21 – [Max frequency]. When remote keypad is connected, keypad keys on the body are deactivated.• Keypad Frequency setting 2Group Code Parameter Name Setting Range Initial UnitDrive group 0.00 [Frequency Command] - 0 ~ 400 0.00 HzFrq [Frequency mode] 1 0 ~ 9 0• Set Frq – [Frequency mode] to 1{Frequency setting via Keypad 2}.• In 0.00, frequency is changed upon pressing the Up ()/Down () key. In this case,UP/Down keys serve as a potentiometer.• The value is settable less than F21 – [Max frequency]. When remote keypad is connected, keypad keys on the body are deactivated.7-1