iG5A, product manual - H2flow

• Function group 1LEDdisplayAddressforcommunicationParameter nameMin/MaxrangeDescriptionFactorydefaultsAdj.duringrunPageF21 1) A215 [Maxfrequency]40 ~ 400[Hz]This parameter sets the highest frequencythe inverter can output.It is frequency reference for Accel/Decel(See H70)60.00 X 7-21CautionAny frequency cannot be set above Maxfrequency except Base frequencyF22 A216 [Basefrequency]F23 A217 [Startfrequency]F24 A218 [Frequencyhigh/lowlimitselect]F252)A219[Frequency highlimit]F26 A21A [Frequency lowlimit]F27 A21B [TorqueBoostselect]F28 A21C [Torqueboost inforwarddirection]F29 A21D [Torqueboost inreversedirection]30 ~ 400[Hz]0.1 ~ 10[Hz]The inverter outputs its rated voltage to themotor at this frequency (see motornameplate).The inverter starts to output its voltage atthis frequency.It is the frequency low limit.0 ~ 1 This parameter sets high and low limit ofrun frequency.0 ~ 400[Hz]0.1 ~ 400[Hz]0 ~ 10 ~ 15[%]This parameter sets high limit of the runfrequency.It cannot be set above F21 – [Maxfrequency].This parameter sets low limit of the runfrequency.It cannot be set above F25 - [Frequencyhigh limit] and below F23 – [Startfrequency].0 Manual torque boost1 Auto torque boostThis parameter sets the amount of torqueboost applied to a motor during forwardrun.It is set in percent of Max output voltage.This parameter sets the amount of torqueboost applied to a motor during reverserun.It is set as a percent of Max output voltage1) : If H40 is set to 3 (Sensorless vector), Max. frequency is settable up to 300Hz.2) : Only displayed when F24 (Frequency high/low limit select) is set to 1.60.00 X 7-170.50 X 7-210 X60.00 X0.50 X7-210 X 7-192 X 7-192 X 7-195-4